1024programmer Photoshop Post-production knowledge, six common post-production mistakes – skills tutorial

Post-production knowledge, six common post-production mistakes – skills tutorial

For novices, they often make some minor mistakes during post-processing. This article lists six minor mistakes that novices often make to avoid making them again.

There are very few people who “learn post-processing first and then start taking pictures.” Even if you are a photography master, you still have to start from scratch when it comes to post-processing. Since you are a novice, you will inevitably go through a process of trial and error, and you can make progress only by making constant mistakes. For the 6 problems listed below, it is not terrible to make mistakes. What is terrible is that you still don’t admit that you have made them!

Post-stage knowledge, six common post-stage mistakes  _www.16xx8.com
www.16xx8.com

As a conscious photography enthusiast, when you start to use RAW format instead of JPEG, it means that you start to have expectations for the post-production process. But at the beginning, you will find that the RAW format photos all look gray and dull. This is because it saves the original data when the camera was shot, and the reason why you think “straight out” JPEG looks good is actually because It has been processed by the camera’s preset algorithm. Since the photos in RAW format are so “bland”, many friends must want to “add fuel and vinegar” to them, but using too much force will be self-defeating! Just like when cooking, no matter how good the ingredients are, they are burnt.

1. Excessive pursuit of dark details

Some friends have a misunderstanding about photos. They think that clearer photos with more details are good photos. For this reason, they lighten all the dark parts of the photo, causing all the light and dark levels of the photo to be lost. For the sake of details, the contrast is reduced, the visual stimulation is weakened, and the originally beautiful photos become dull. Isn’t this counterproductive? The places that should be bright are bright, and the places that should be dark are dark.You are creating photographic works, not recording for archives According to. Why do you need so many details?

Post-stage knowledge, six common post-stage mistakes  _www.16xx8.com

Excessively brightening the dark areas will not only make the picture look unnatural, but will also cause noise in the later stage due to excessive brightness. Of course, except for some special post-effects, such as HDR technology, more picture details are obtained through high dynamic range image rendering.

Post-stage knowledge, six common post-stage mistakes  _www.16xx8.com

2. Oversaturated and boring

Different lenses and different light conditions will cause the color of the photo to deviate. Especially if the source file is directly exported from Raw, you will feel that the photo is flat and has no “taste”. Therefore, many friends add saturation to the photos in the later stage, and they must adjust it until they are colorful and rich in taste to be satisfied. Adjusting saturation is indeed a good way to quickly improve the picture, but it can only grab the audience’s attention for a short time and cannot Arouse people’s interest. In post-production photography, color management is a very particular technology. Let’s not talk about advanced color control, at least it must not make readers bored! The so-called real water has no fragrance. Although the drink is delicious, it is not water after all.

Post-stage knowledge, six common post-stage mistakes  _www.16xx8.com

Many novices are accustomed to smart filters, which can only adjust the overall saturation of the image. But in Lightroom or Photoshop, you can adjust each individual color separately in hue, brightness, and saturation. This is so controllable. The scope is even greater. Saturation is not the richer, the better, but the more natural, the better.

Post-stage knowledge, six common post-stage mistakes  _www.16xx8.com

3. Over-sharpening is just superfluous

Remember, sharpening cannot save defocus! Sharpening is to improve the contrast of details at the edges of graphics, giving people a clearer feeling, but that’s all. This is supposed to be the job of the lens. Only the lens can present natural and sharp images. No matter how amazing the post-production process is, it cannot achieve the same effect. (Nonsense, otherwise who would spend so much money on developing lenses)

Post-stage knowledge, six common post-stage mistakes  _www.16xx8.com

As shown in the picture above, excessive pursuit of sharpening can easily produce white fringes at the edges of graphics. The original intention is to improve the clarity of the picture, but the result is that the image is deformed. Isn’t this putting the cart before the horse?

Post-stage knowledge, six common post-stage mistakes  _www.16xx8.com

4. Cutting is the last resort

To be honest, Although cropping is effective, it is a very low-level method because it is for the early stage Contempt, in short, is lazy reconstruction of the picture. A good photo should maintain a high level from the early stage to the later stage. Many people take a lucky shot and shoot casually with the composition in the early stage, thinking “I can adjust it in the later stage anyway”. The results of it? A lucky mentality can only get lucky photos. What can be done in the early stage should not be left to the later stage. Remember this sentence and photography will benefit you throughout your life. Focus on the early composition and use cropping as a last resort. This is what a professional photographer should look like.

Post-stage knowledge, six common post-stage mistakes  _www.16xx8.com

Since cropping is a reconstructed image, you should pay attention to some composition details. The position of cropping (insert portrait cropping link), the layout of the picture, the white space and space, the selection of elements, etc., when you cannot crop, these aspects should all be considered.

Post-stage knowledge, six common post-stage mistakes  _www.16xx8.com

5. Retaining some noise is not necessarily a bad thing

In dark light conditions or high shutter speeds, photographers are often forced to increase the ISO, and the result is an increase in picture noise. Although the noise is small, the problem is very critical. This has also triggered a dispute between camera manufacturers on ISO noise reduction technology. Noise elimination has also become an essential function of various post-processing software.

Post-stage knowledge, six common post-stage mistakes  _www.16xx8.com

It is certainly a good thing to be able to solve the noise problem from hardware technology, but starting from post-processing technology, it needs to be considered appropriately. Due to digital algorithms, excessive noise reduction will make the picture smooth, cause serious smearing effects, and make the picture unnatural. Especially images with lots of detail or texture can make the photo look like a texture. Between “image quality impairment” and “noise elimination”, you have to strike a balance. In order to make the image real and attractive, Even keeping some noise is not a bad thing. Don’t commit the photophobia!

Post-stage knowledge, six common post-stage mistakes  _www.16xx8.com

6. Forgot to back up the original file

This is a later habit formation. Maybe you are very satisfied with your work after finishing it, but one day you look back and find that your P photos are ugly (seriously, it happens all the time), but you can’t find the original image file, and a photo is wasted. .

Post-stage knowledge, six common post-stage mistakes  _www.16xx8.com

For a work, different periods will have different understandings. Keeping the original film is not only a retrospective record, but also Opportunity to try new approaches.

Later knowledge  , six common late-stage mistakes_www.16xx8.com

For novices, they often make some minor mistakes during post-processing. This article lists six minor mistakes that novices often make to avoid making them again.

There are very few people who “learn post-processing first and then start taking pictures.” Even if you are a photography master, you still have to start from scratch when it comes to post-processing. Since you are a novice, you will inevitably go through a process of trial and error, and you can make progress only by making constant mistakes. For the 6 problems listed below, it is not terrible to make mistakes. What is terrible is that you still don’t admit that you have made them!

Post-stage knowledge, six common post-stage mistakes  _www.16xx8.com
www.16xx8.com

As a conscious photography enthusiast, when you start to use RAW format instead of JPEG, it means that you start to have expectations for the post-production process. But at the beginning, you will find that the RAW format photos all look gray and dull. This is because it saves the original data when the camera was shot, and the reason why you think “straight out” JPEG looks good is actually because It has been processed by the camera’s preset algorithm. Since the photos in RAW format are so “bland”, many friends must want to “add fuel and vinegar” to them, but using too much force will be self-defeating! Just like when cooking, no matter how good the ingredients are, they are burnt.

1. Excessive pursuit of dark details

Some friends have a misunderstanding about photos. They think that clearer photos with more details are good photos. For this reason, they lighten all the dark parts of the photo, causing all the light and dark levels of the photo to be lost. For the sake of details, the contrast is reduced, the visual stimulation is weakened, and the originally beautiful photos become dull. Isn’t this counterproductive? The places that should be bright are bright, and the places that should be dark are dark.You are creating photographic works, not recording for archives According to. Why do you need so many details?

Post-stage knowledge, six common post-stage mistakes  _www.16xx8.com

Excessively brightening the dark areas will not only make the picture look unnatural, but will also cause noise in the later stage due to excessive brightness. Of course, except for some special post-effects, such as HDR technology, more picture details are obtained through high dynamic range image rendering.

Post-stage knowledge, six common post-stage mistakes  _www.16xx8.com

2. Oversaturated and boring

Different lenses and different light conditions will cause the color of the photo to deviate. Especially if the source file is directly exported from Raw, you will feel that the photo is flat and has no “taste”. Therefore, many friends add saturation to the photos in the later stage, and they must adjust it until they are colorful and rich in taste to be satisfied. Adjusting saturation is indeed a good way to quickly improve the picture, but it can only grab the audience’s attention for a short time and cannot Arouse people’s interest. In post-production photography, color management is a very particular technology. Let’s not talk about advanced color control, at least it must not make readers bored! The so-called real water has no fragrance. Although the drink is delicious, it is not water after all.

Post-stage knowledge, six common post-stage mistakes  _www.16xx8.com

Many novices are accustomed to smart filters, which can only adjust the overall saturation of the image. But in Lightroom or Photoshop, you can adjust each individual color separately in hue, brightness, and saturation. This is so controllable. The scope is even greater. Saturation is not the richer, the better, but the more natural, the better.

Post-stage knowledge, six common post-stage mistakes  _www.16xx8.com

3. Over-sharpening is just superfluous

Remember, sharpening cannot save defocus! Sharpening is to improve the contrast of details at the edges of graphics, giving people a clearer feeling, but that’s all. This is supposed to be the job of the lens. Only the lens can present natural and sharp images. No matter how amazing the post-production process is, it cannot achieve the same effect. (Nonsense, otherwise who would spend so much money on developing lenses)

Post-stage knowledge, six common post-stage mistakes  _www.16xx8.com

As shown in the picture above, excessive pursuit of sharpening can easily produce white fringes at the edges of graphics. The original intention is to improve the clarity of the picture, but the result is that the image is deformed. Isn’t this putting the cart before the horse?

Post-stage knowledge, six common post-stage mistakes  _www.16xx8.com

4. Cutting is the last resort

To be honest, Although cropping is effective, it is a very low-level method because it is for the early stage Contempt, in short, is lazy reconstruction of the picture. A good photo should maintain a high level from the early stage to the later stage. Many people take a lucky shot and shoot casually with the composition in the early stage, thinking “I can adjust it in the later stage anyway”. The results of it? A lucky mentality can only get lucky photos. What can be done in the early stage should not be left to the later stage. Remember this sentence and photography will benefit you throughout your life. Focus on the early composition and use cropping as a last resort. This is what a professional photographer should look like.

Post-stage knowledge, six common post-stage mistakes  _www.16xx8.com

Since cropping is a reconstructed image, you should pay attention to some composition details. The position of cropping (insert portrait cropping link), the layout of the picture, the white space and space, the selection of elements, etc., when you cannot crop, these aspects should all be considered.

Post-stage knowledge, six common post-stage mistakes  _www.16xx8.com

5. Retaining some noise is not necessarily a bad thing

In dark light conditions or high shutter speeds, photographers are often forced to increase the ISO, and the result is an increase in picture noise. Although the noise is small, the problem is very critical. This has also triggered a dispute between camera manufacturers on ISO noise reduction technology. Noise elimination has also become an essential function of various post-processing software.

Post-stage knowledge, six common post-stage mistakes  _www.16xx8.com

It is certainly a good thing to be able to solve the noise problem from hardware technology, but starting from post-processing technology, it needs to be considered appropriately. Due to digital algorithms, excessive noise reduction will make the picture smooth, cause serious smearing effects, and make the picture unnatural. Especially images with lots of detail or texture can make the photo look like a texture. Between “image quality impairment” and “noise elimination”, you have to strike a balance. In order to make the image real and attractive, Even keeping some noise is not a bad thing. Don’t commit the photophobia!

Post-stage knowledge, six common post-stage mistakes  _www.16xx8.com

6. Forgot to back up the original file

This is a later habit formation. Maybe you are very satisfied with your work after finishing it, but one day you look back and find that your P photos are ugly (seriously, it happens all the time), but you can’t find the original image file, and a photo is wasted. .

Post-stage knowledge, six common post-stage mistakes  _www.16xx8.com

For a work, different periods will have different understandings. Keeping the original film is not only a retrospective record, but also Opportunity to try new approaches.

Later knowledge  , six common late-stage mistakes_www.16xx8.com

This article is from the internet and does not represent1024programmerPosition, please indicate the source when reprinting:https://www.1024programmer.com/793045

author: admin

Previous article
Next article

Leave a Reply

Your email address will not be published. Required fields are marked *

Contact Us

Contact us

181-3619-1160

Online consultation: QQ交谈

E-mail: [email protected]

Working hours: Monday to Friday, 9:00-17:30, holidays off

Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
首页
微信
电话
搜索