1024programmer Photoshop Fireworks characters, tutorial on making radiating-shaped fireworks characters – ordinary character effects

Fireworks characters, tutorial on making radiating-shaped fireworks characters – ordinary character effects

The main method of making this firework character is to first convert the text into a path, then set up the brush tool, use the stroke path to draw a little bit of speckled text, then execute polar coordinates, then use the wind filter to blow out the three-dimensional effect, and run it again Polar coordinates are sufficient. The method is very simple. Please pass it on to friends who need it.

Final effect

www.  16xx8.com_03334BA5-0.jpg

1. Create a new canvas with 1024 * 768 pixels and a resolution of 72. The background is filled with black. Then CTRL+O to open the text material below (it is recommended that when practicing, you use the brush tool to draw the text you want to practice)

www.16xx8.com_03334B130-1.png
www.16xx8.com

Then use the move tool to drag it in, the effect is as shown below:

www.  16xx8.com_0333463031-2.jpg

2. Hold down Ctrl + left-click the text thumbnail in the layer panel to load the text selection, as shown below.

www.  16xx8.com_0333462439-3.jpg

3. Enter the path panel and select the “Generate working path from selection” button below to turn the selection into a path.

www.  16xx8.com_03334644K-4.jpg
4. Return to the layers panel and hide the original text layer. The effect is as shown below.

www.  16xx8.com_0333464O5-5.jpg

5. Create a new layer and keep the path unchanged, as shown below.

www.  16xx8.com_03334620E-6.jpg

6. Select the Brush Tool, select a round brush, set the mode to “Normal”, and set the opacity and flow to 100%, as shown below.

www.  16xx8.com_03334CO7-7.jpg

7. Press F5 to bring up the brush preset panel, and then set it.

Brush tip shape: diameter 8 px, hardness: 100%, spacing: 199%, as shown below.

www.  16xx8.com_0333462241-8.jpg

Shape dynamics: Size jitter is set to 100%, other settings are as shown below.

www.  16xx8.com_0333464263-9.jpg

Dispersion: Check “Two Axis”, the scatter value is 392, the quantity is 1, and other settings are as shown below.

www.  16xx8.com_03334C333-10.jpg

Color dynamics:

www.  16xx8.com_0333461255-11.jpg

Other dynamics: Set as shown below. After setting, check the smoothing option below.

www.  16xx8.com_0333462954-12.jpg
8. Set the foreground color to red and the background color to yellow, as shown below.

www.  16xx8.com_03334BP8-13.jpg

9. Select the pen tool, right-click on the path and select “Stroke Path”, as shown in Figure 14. Select “Brush” in the pop-up dialog box. After confirmation, you will get the effect shown in Figure 16.

www.  16xx8.com_03334A430-14.jpg

www.  16xx8.com_0333461023-15.jpg

www.  16xx8.com_03334Cb5-16.jpg

10. Create a new layer.

www.  16xx8.com_0333462538-17.jpg

11. Press the left bracket key to shrink the brush a little and set it to 6, as shown below.

www.  16xx8.com_03334C4C-18.jpg

12. Then select the pen tool, right-click on the path and select “”Stroke path”, also select the brush, the effect is as shown in Figure 21.

www.  16xx8.com_03334624M-19.jpg

www.  16xx8.com_0333462260-20.jpg

www.  16xx8.com_03334CF1-21.jpg
13. Create a new layer and repeat the above operation. This time, set the brush to 4. The process is as shown in Figure 22 – 26.

www.  16xx8.com_03334Ca2-22.jpg

www.  16xx8.com_03334B142-23.jpg

www.  16xx8.com_0333461952-24.jpg

www.  16xx8.com_0333461Q8-25.jpg

www.  16xx8.com_03334629E-26.jpg

14. Take a look at the overall effect.

www.  16xx8.com_03334A2X-27.jpg

15. Select several layers of light spots, as shown in Figure 28, and then press Ctrl + E to merge them into one layer, as shown in Figure 29.

www.  16xx8.com_0333461932-28.jpg

www.  16xx8.com_0333462X9-29.jpg
16. Press Ctrl + J to copy the merged text to one layer, as shown below.

www.  16xx8.com_0333461S1-30.jpg

17. Then merge the text and text copy layers, and the effect will be as shown below.

www.  16xx8.com_03334C253-31.jpg

18. Press Ctrl + N to create a new document with the size as shown below. After confirmation, fill the background with black.

www.  16xx8.com_03334CP3-32.jpg

19. Drag the merged text into the new canvas and adjust it to the middle position, as shown below.

www.  16xx8.com_0333463252-33.jpg

20. Then change the text layer name to “Text”, as shown below.

www.  16xx8.com_03334C435-34.jpg

21. Press Ctrl + J to duplicate the text layer, as shown below.

www.  16xx8.com_03334B320-35.jpg

22. Hide the text copy layer, and then merge the original text and background layers.

www.  16xx8.com_03334BH1-36.jpg

www.  16xx8.com_03334A556-37.jpg
23. Press Ctrl + J to duplicate the current layer, as shown below.

www.  16xx8.com_03334B639-38.jpg

24. Select the menu: Filter > Distort > Polar Coordinates.

www.  16xx8.com_03334AZ3-39.jpg

25. Select “Polar Coordinates to Plane Coordinates”, and the parameter settings and effects are as shown below.

www.  16xx8.com_0333461V9-40.jpg

www.  16xx8.com_03334644M-41.jpg

26. Select the menu: Image > Rotate Canvas > Rotate 90 degrees clockwise, as shown below.

www.  16xx8.com_0333461444-42.jpg

www.16xx8.com_03334642R-43.jpg

27. Select the menu: Filter > Blur > Gaussian Blur, the value is 1, the effect is as shown in Figure 45.

www.  16xx8.com_0333464W2-44.jpg

www.  16xx8.com_0333461636-45.jpg

28. Select the menu: Filter > Stylize > Wind.

www.  16xx8.com_03334CK3-46.jpg
29. Select the method “Wind” and the direction “From Left”, as shown below. The effect after confirmation is shown in Figure 48.

www.  16xx8.com_0333462240-47.jpg

www.  16xx8.com_03334C391-48.jpg

30. Press Ctrl + F three times to enhance the wind blowing effect, as shown below.

www.  16xx8.com_03334A5c-49.jpg

31. Select the menu: Image > Rotate Canvas > Rotate 90 degrees counterclockwise, as shown below.

www.  16xx8.com_03334C108-50.jpg

www.  16xx8.com_0333463J6-51.jpg

32. Then select the menu: Filter > Distort > Polar Coordinates, select “Planar Coordinates to Polar Coordinates”, the effect is as shown in Figure 54.

www.  16xx8.com_0333461094-52.jpg

www.  16xx8.com_03334C028-53.jpg

www.  16xx8.com_03334C111-54.jpg

33. Display the text copy layer, as shown below.

www.  16xx8.com_03334A419-55.jpg
34. Create a brightness/contrast adjustment layer, increase the brightness and contrast, and set the parameters as shown in Figure 56. After confirmation, press Ctrl + Alt + G to create a shear Mask. The effect is as shown in Figure 57.

www.  16xx8.com_03334BR7-56.jpg

www.  16xx8.com_03334633Q-57.jpg

Finally, fine-tune the overall light and shade, and add some small decorations locally to complete the final effect.

www.  16xx8.com_03334BA5-0.jpg

The main method of making this firework character is to first convert the text into a path, then set up the brush tool, use the stroke path to draw a little bit of speckled text, then execute polar coordinates, then use the wind filter to blow out the three-dimensional effect, and run it again Polar coordinates are sufficient. The method is very simple. Please pass it on to friends who need it.

Final effect

www.  16xx8.com_03334BA5-0.jpg

1. Create a new canvas with 1024 * 768 pixels and a resolution of 72. The background is filled with black. Then CTRL+O to open the text material below (it is recommended that when practicing, you use the brush tool to draw the text you want to practice)

www.16xx8.com_03334B130-1.png
www.16xx8.com

Then use the move tool to drag it in, the effect is as shown below:

www.  16xx8.com_0333463031-2.jpg

2. Hold down Ctrl + left-click the text thumbnail in the layer panel to load the text selection, as shown below.

www.  16xx8.com_0333462439-3.jpg

3. Enter the path panel and select the “Generate working path from selection” button below to turn the selection into a path.

www.  16xx8.com_03334644K-4.jpg
4. Return toIn the Layers panel, hide the original text layer. The effect is as shown below.

www.  16xx8.com_0333464O5-5.jpg

5. Create a new layer and keep the path unchanged, as shown below.

www.  16xx8.com_03334620E-6.jpg

6. Select the Brush Tool, select a round brush, set the mode to “Normal”, and set the opacity and flow to 100%, as shown below.

www.  16xx8.com_03334CO7-7.jpg

7. Press F5 to bring up the brush preset panel, and then set it.

Brush tip shape: diameter 8 px, hardness: 100%, spacing: 199%, as shown below.

www.  16xx8.com_0333462241-8.jpg

Shape dynamics: Size jitter is set to 100%, other settings are as shown below.

www.  16xx8.com_0333464263-9.jpg

Dispersion: Check “Two Axis”, the scatter value is 392, the quantity is 1, and other settings are as shown below.

www.  16xx8.com_03334C333-10.jpg

Color dynamics:

www.  16xx8.com_0333461255-11.jpg

Other dynamics: Set as shown below. After setting, check the smoothing option below.

www.  16xx8.com_0333462954-12.jpg
8. Set the foreground color to red and the background color to yellow, as shown below.

www.  16xx8.com_03334BP8-13.jpg

9. Select the pen tool, right-click on the path and select “Stroke Path”, as shown in Figure 14. Select “Brush” in the pop-up dialog box. After confirmation, you will get the effect shown in Figure 16.

www.  16xx8.com_03334A430-14.jpg

www.  16xx8.com_0333461023-15.jpg

www.  16xx8.com_03334Cb5-16.jpg

10. Create a new layer.

www.  16xx8.com_0333462538-17.jpg

11. Press the left bracket key to shrink the brush a little and set it to 6, as shown below.

www.  16xx8.com_03334C4C-18.jpg

12. Then select the pen tool, right-click on the path and select “Stroke Path”, and also select the brush. The effect is as shown in Figure 21.

www.  16xx8.com_03334624M-19.jpg

www.  16xx8.com_0333462260-20.jpg

www.  16xx8.com_03334CF1-21.jpg
13. Create a new layer and repeat the above operation. This time, set the brush to 4. The process is as shown in Figure 22 – 26.

www.  16xx8.com_03334Ca2-22.jpg

www.  16xx8.com_03334B142-23.jpg

www.  16xx8.com_0333461952-24.jpg

www.  16xx8.com_0333461Q8-25.jpg

www.  16xx8.com_03334629E-26.jpg

14. Take a look at the overall effect.

www.  16xx8.com_03334A2X-27.jpg

15. Select several layers of light spots, as shown in Figure 28, and then press Ctrl + E to merge them into one layer, such asFigure 29.

www.  16xx8.com_0333461932-28.jpg

www.  16xx8.com_0333462X9-29.jpg
16. Press Ctrl + J to copy the merged text to one layer, as shown below.

www.  16xx8.com_0333461S1-30.jpg

17. Then merge the text and text copy layers, and the effect will be as shown below.

www.  16xx8.com_03334C253-31.jpg

18. Press Ctrl + N to create a new document with the size as shown below. After confirmation, fill the background with black.

www.  16xx8.com_03334CP3-32.jpg

19. Drag the merged text into the new canvas and adjust it to the middle position, as shown below.

www.  16xx8.com_0333463252-33.jpg

20. Then change the text layer name to “Text”, as shown below.

www.  16xx8.com_03334C435-34.jpg

21. Press Ctrl + J to duplicate the text layer, as shown below.

www.  16xx8.com_03334B320-35.jpg

22. Hide the text copy layer, and then merge the original text and background layers.

www.  16xx8.com_03334BH1-36.jpg

www.  16xx8.com_03334A556-37.jpg
23. Press Ctrl + J to duplicate the current layer, as shown below.

www.  16xx8.com_03334B639-38.jpg

24. Select the menu: Filter > Distort > Polar Coordinates.

www.  16xx8.com_03334AZ3-39.jpg

25. Select “Polar Coordinates to Plane Coordinates”, and the parameter settings and effects are as shown below.

www.  16xx8.com_0333461V9-40.jpg

www.  16xx8.com_03334644M-41.jpg

26. Select the menu: Image > Rotate Canvas > Rotate 90 degrees clockwise, as shown below.

www.  16xx8.com_0333461444-42.jpg

www.  16xx8.com_03334642R-43.jpg

27. Select the menu: Filter > Blur > Gaussian Blur, the value is 1, the effect is as shown in Figure 45.

www.  16xx8.com_0333464W2-44.jpg

www.  16xx8.com_0333461636-45.jpg

28. Select the menu: Filter > Stylize > Wind.

www.  16xx8.com_03334CK3-46.jpg
29. Select the method “Wind” and the direction “From Left”, as shown below. The effect after confirmation is shown in Figure 48.

www.  16xx8.com_0333462240-47.jpg

www.  16xx8.com_03334C391-48.jpg

30. Press Ctrl + F three times to enhance the wind blowing effect, as shown below.

www.  16xx8.com_03334A5c-49.jpg

31. Select the menu: Image > Rotate Canvas > Rotate 90 degrees counterclockwise, as shown below.

www.  16xx8.com_03334C108-50.jpg

www.  16xx8.com_0333463J6-51.jpg

32. Then select the menu: Filter > Distort > Polar Coordinates, select “Planar Coordinates to Polar Coordinates”, the effect is as shown in Figure 54.

www.  16xx8.com_0333461094-52.jpg

www.  16xx8.com_03334C028-53.jpg

www.  16xx8.com_03334C111-54.jpg

33. Display the text copy layer, as shown below.

www.  16xx8.com_03334A419-55.jpg
34. Create a brightness/contrast adjustment layer, increase the brightness and contrast, and set the parameters as shown in Figure 56. After confirmation, press Ctrl + Alt + G to create a shear Mask. The effect is as shown in Figure 57.

www.  16xx8.com_03334BR7-56.jpg

www.  16xx8.com_03334633Q-57.jpg

Finally, fine-tune the overall light and shade, and add some small decorations locally to complete the final effect.

www.  16xx8.com_03334BA5-0.jpg

This article is from the internet and does not represent1024programmerPosition, please indicate the source when reprinting:https://www.1024programmer.com/793392

author: admin

Previous article
Next article

Leave a Reply

Your email address will not be published. Required fields are marked *

Contact Us

Contact us

181-3619-1160

Online consultation: QQ交谈

E-mail: [email protected]

Working hours: Monday to Friday, 9:00-17:30, holidays off

Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
首页
微信
电话
搜索