1024programmer Photoshop Basics: 42 tips for manipulating Photoshop layers – Tips Tutorial

Basics: 42 tips for manipulating Photoshop layers – Tips Tutorial

Published on 2007-9-20 18:21 Basics: 42 tips related to operating Photoshop layers Author: Anonymous Source: Webpage Teaching Network PS Tutorial Forum: http://bbs.16xx8.com

1. If you only want to display a certain layer,
just press the Alt key and click the layer visibility icon indicating the layer visibility to hide other layers,
press again All layers are displayed.

2. Press the Alt key and click the brush icon in front of the current layer to unlink all layers from it.

3. To change the opacity of the currently active tool or layer, use the numeric keys on the small keyboard.
Press “1” for 10% opacity, and “5” for 50%. And “0” represents 100% opacity.
Continuously pressing a number, such as “45”, will result in an opacity of 45%.

Note: The above method will also affect the currently active brush tool. Therefore, if you want to change the opacity of the active layer, please switch to the move tool or other tools before changing it. Select tool.

4. Press the Alt key and click the “Delete Layer” icon at the bottom of the “Layer” palette to delete the layer without popping up any confirmation prompt. This operation is performed in the channel The same applies to paths.

 Tip:This technique can also be used with layer masks and clipping paths. Now click on the appropriate thumbnail and then press Alt Click the “Delete” icon after pressing the key to delete the mask or path without any confirmation prompt.

5. Press Ctrl and click the “Delete Layer” icon at the bottom of the “Layer” palette to delete all related layers at the same time.

Note: This technique cannot be used if all layers are related, because you cannot delete every layer in an image, because an image requires at least There is a layer.

6. When you are currently using the “Move” tool or pressing the Ctrl key, right-click anywhere on the canvas to get a list of layers under the mouse pointer. Arrange them in order from the top layer to the bottom layer. Select a layer name in the list to make that layer active.

Tips for naming layers and groups: If you are used to naming layers in lower case and names groups in upper case (or vice versa), you can use It’s easy to distinguish between the two when selecting a layer or setting from the right-click context menu.

 Tip: Pressing the Alt key and then right-clicking will allow the mouse pointer to select the top layer. Likewise, you can enable the Auto-select layers option in the Options palette when the Move tool is selected. If you press Alt+Shift and then right-click, you can associate/disassociate the top layer with the current layer.

7. When the “Move” tool is selected, press the Ctrl key and click or drag to automatically select or move the top layer under the mouse pointer. Press Ctrl+Shift and then click or drag to associate the top layer with the currently active layer.

8. Press the Ctrl key and then click the “Create New Layer” or “Create New Group” button at the bottom of the “Layers” palette to insert a new layer or group into the Below the current layer or group. Press Ctrl+Alt and click to display the dialog box related to the new layer or group.

9. Press the Alt key and double-click a layer name in the “Layer” palette to display the “Layer Properties” dialog box, where you can rename the layer.

Tips: Press the Alt key and double-click on a background layer to convert it into a normal layer named “Layer 0”. There will be no confirmation prompt during this process.

10. If you want to reduce the opacity of a certain part of a layer, first create a selection, then press Shift+Backspace to access the “Fill” dialog box, and set the blending mode to “Clear”. Then make settings for the selection that needs to be opaque.

Another method is to select “Edit > Clear” the selected area to create a historical state, then use the “Fill” command and content settings to store the content of the selected area, and set the required history record Opacity.

11. By default, the shape will be set according to the color fill layer. To change such a setting, select a new fill/adjustment layer in the submenu of Layer > Change Layer Contents.

12. Use the following keyboard shortcuts to move and navigate between layers:
Alt+[ / ] activates the previous/next visible layer
Alt+Shift+ [ / ] Activate the bottom/top visible layer
 Ctrl+ [ / ] Move the layer down/up
 Ctrl+Shift+[ / ] Move the layer to the bottom/top

13. To drag multiple layers between documents, link them first and then use the Move tool to drag them from one document window to the other.��In a document window.

Note: You cannot drag multiple layers from the Layers palette into another document—even if they are linked to each other. This only works on the selected layers. of movement.

14. You can create a copy of a layer by dragging it to the “Create New Layer” (“Create New Snapshot”) button at the bottom of the “Layers” palette; or you You can also use Duplicate Layer in the Layers palette menu.

15. Use Ctrl+J (Layer>New>Layer via copy) to create a copy of the current layer without an active selection.

16. Press the Alt key and drag a layer to the “Create New Layer” icon at the bottom of the “Layers” palette to copy this layer to a new document.
 Layer Group

 17. Changing the blending mode or opacity of a layer group will affect all layers in this group, so that All layers in the group can be treated as one layer for operation.

18. To put multiple layers into a layer group at the same time, you can link these layers now, and then select “New Group from Layers” in the layer palette menu; Or you can choose “Layer > New > Create Group from Layer”.

Tips:You can press the Alt key when you select “New Group from Layers” so that you can ignore the dialog box and edit the layer group. Use default names and properties.

19. To lock the transparency, pixels, position, etc. of all layers in a group, you can select “Layer > Lock All Layers in Group”.

 Tips: Press the / key to turn the current lock setting on or off.

 20. To release all the layers in a group, such as deleting the group without deleting the layers in it, you can activate the layer group and press Ctrl+Alt and click the “Delete” button. Or press Ctrl and drag the layer group above the “Delete” icon. Similarly, you can also choose to delete only the group in the result confirmation dialog box after clicking the delete icon.

21. Copy a layer group that includes all the layers in it by dragging it to the “Create New Group” button at the bottom of the “Layers” palette; or you can Select “Duplicate Group” from the menu in the Layers palette.

22. To create a new document on a layer group, you can press the Alt key and drag the group above the “Create New Group” icon at the bottom of the “Layers” palette. ; Then, in the dialog box that appears, select “New” from the “Document” drop-down menu.

23. To remove the bottom layer in a layer group, drag the thumbnail of the layer in the layers palette to the left.

24. To copy multiple groups, link these groups first. Next, copy the document and use the drag tool to drag the groups into the original document. At this point you can discard the copied document.

25. You can add clipping paths (vector masks) or traditional layer masks to a layer group. Group masks affect all layers within the group. It allows a given layer to have up to four masks: a layer mask and a clipping path that can be applied by layer or group.

26. If you want to merge several visible layers downward, you can first link them and then select the “Down” merge command. If the current layer is connected to other If the layers are linked, then this command becomes a command to merge linked layers.

 27. You can hold down the Alt key and click between layers to group them together. This is a convenient method when some layers are linked together, because you only want to group certain layers into the same group.

28. Here is a method that can help you reorder several layers at the same time: first group several layers that need to be sorted into a group, and then position this group to a new position. Just disband the group.
Masks and Channels

29. Click “Add Layer Mask” at the bottom of the “Layer” palette to add a mask that displays the current selection. plate. Press the Alt key and click the “Add Layer Mask” button to add a mask that hides the current selection.

30. To create a mask for the current layer that depicts the contents of the current layer, You can drag and drop this layer above the “Add Layer Mask”. Press the Alt key and drag and drop to add a mask that hides the contents of the current layer.

 31. To copy a layer mask from one layer to another layer, first select the layer you want to apply the mask to, and make sure it does not have a layer mask, and then change the thumbnail of the layer mask Drag another layer above Add Layer Mask at the bottom of the Layers palette

 Tip: Before placing a layer The above method also works when copying the clipping path in another layer.

32. The following hotkeys can help when you use layer masks:
Press the Alt key and click on the mask thumbnail to edit/���Show layer mask

Press the Shift key and drag the layer mask thumbnail to open/close the layer mask

Press Ctrl and click the mask Or press Ctrl+Alt+ to load the layer mask as a selection

After pressing the Ctrl+Shift key, click the layer mask thumbnail to add it to the current selection

After pressing the Ctrl+Alt key Click the layer mask thumbnail to subtract it from the current selection

Press Ctrl+Alt+Shift and click the thumbnail to intersect the current selection

Press Alt+Shift and click or press the key to View the layer mask in ruby ​​mode

Ctrl+~ Switch focus between the layer and layer mask

Ctrl+~ Switch focus to the layer

33. By default, channels have hotkeys associated with them. You can use these hotkeys to load a channel’s selection. The following are some hotkeys for general color modes:

RGB mode CYMK mode Index mode

Ctrl+~=RGB Ctrl+~=CYMK Ctrl+1=Index

Ctrl + 1 = red Ctrl + 1 = cyan Ctrl + 2 = other channels

Ctrl + 2 = green Ctrl + 2 = yellow… (and so on
Ctrl + 3 = blue Ctrl + 3 = magenta
Ctrl + 4 = other channels Ctrl+4=Black

 ……
 (and so on) Ctrl+5=Other channels

 34. When you are in the “Quick Mask” mode, use (~) It can be viewed in ruby ​​and channel mode.

35. Press Alt+Ctrl and click the “Create New Channel” button at the bottom of the “Channel” palette to add a new one based on the current selection. The spot color channel.

36. To save a copy of the quick mask as an alpha channel, drag the quick mask over the “Create New Channel” button. Paths

 37. You can easily close all paths by clicking in a blank area in the “Paths” palette.

 Tips: You can display/undisplay the target path by pressing Ctrl+Shift+H (View > Display > Target Path)

38. Press the Alt key and click “Fill path with foreground color”. Stroke Path with Brush, Load Path as Selection, and Generate Work Path from Selection icons will give you a menu of available tools and options.

39. To To convert the active path into a layer clipping path, you can press the Ctrl key and click the “Add Layer Mask” icon. Press the Ctrl+Alt key and click the “Add Layer Mask” icon to add a hidden active path. Content layer clipping path

Note: If the current layer already contains a layer mask, Ctrl Jinan does not need to add a layer clipping path.

40. The following are some shortcuts related to layer clipping paths:

Shortcut key functions

Click the thumbnail of the clipping path to edit/display the layer clipping path

Press Shift and click the thumbnail of the clipping path to open/close the layer clipping path

Press the Ctrl key and click the thumbnail of the clipping path to load the layer clipping path as a selection

Press Ctrl+Shift and click the thumbnail of the clipping path to add it to the current selection
br/>
Press the Alt key and click the thumbnail of the clipping path to subtract it from the current selection

Press Ctrl+Alt+Shift and click the thumbnail of the clipping path to intersect with the current selection
/>
41. To add a shape as a clipping path to the current layer, you can press Ctrl and click the “Add Layer Mask” icon, and then use the shape tool to draw the required shape.

42. Move the mouse over a layer clipping path in the “Layers” palette to temporarily display the associated path in the document window. When you move your mouse away from the thumbnail, the path will disappear.

<!–Collectio

This article is from the internet and does not represent1024programmerPosition, please indicate the source when reprinting:https://www.1024programmer.com/basics-42-tips-for-manipulating-photoshop-layers-tips-tutorial/

author: admin

Previous article
Next article

Leave a Reply

Your email address will not be published. Required fields are marked *

Contact Us

Contact us

181-3619-1160

Online consultation: QQ交谈

E-mail: [email protected]

Working hours: Monday to Friday, 9:00-17:30, holidays off

Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
首页
微信
电话
搜索