Author:荰菏野(Dudaye) Author: Source:PS Alliance
Original image
1. Open the original image, copy two layers, select layer copy 2, execute: Filter > Blur > Gaussian Blur, the value is 3.2, after confirmation, change the layer blending mode to “Screen” “. |
2. Merge layer copy 2 and layer copy 1, press Ctrl + M to adjust the curve, and select RGB: input: 177, output: 100. |
3. Select the menu: Image > Mode > Lab Color, click the channel panel, select the a channel, press Ctrl + A to select all, press Ctrl + C to copy, click the b channel and press Ctrl + V to paste. |
4. Select the menu: Image > Mode > RGB Color, copy the discolored layer, and use the Topaz filter to sharpen it. |
5. Duplicate a layer, press Ctrl + M to adjust the curve, and set the parameters as shown below. |
6. Copy another layer and execute: Filter > Blur > Motion Blur. Set the parameters as shown below. After confirming, use the eraser tool to erase the character part. |
7. A: Click on the channel panel, click on the blue channel, select menu: Image > Apply Image, parameters: Mixing: Multiply, Opacity: 50%, check Invert. B: Click on the green channel, select the menu: Image > Apply Image, parameters: Mixing: Multiply, Opacity: 20%, check Invert. C: Click on the red color channel, select the menu: Image > Apply Image, parameters: Mixing: Color Deepening, Opacity: 20%, Uncheck Invert. |
8. Copy another layer, press Ctrl + M to adjust the curve, and set the parameters as shown below. |
9. Create a new layer, change the layer blending mode to “Soft Light”, add purple and red gradients, erase the characters with the eraser tool, and then add text to complete the final effect. . |
Author:荰菏野(Dudaye) Author: Source:PS Alliance
Original image
1. Open the original image, copy two layers, select layer copy 2, execute: Filter > Blur > Gaussian Blur, the value is 3.2, after confirmation, change the layer blending mode to “Screen” “. |
2. Merge layer copy 2 and layer copy 1, press Ctrl + M to adjust the curve, and select RGB: input: 177, output: 100. |
3. Select the menu: Image > Mode > Lab Color, click the channel panel, select the a channel, press Ctrl + A to select all, press Ctrl + C to copy, click the b channel and press Ctrl + V to paste. |
4. Select the menu: Image > Mode > RGB Color, copy the discolored layer, and use the Topaz filter to sharpen it. |
5. Duplicate a layer, press Ctrl + M to adjust the curve, and set the parameters as shown below. |
6. Copy another layer and execute: Filter > Blur > Motion Blur. Set the parameters as shown below. After confirming, use the eraser tool to erase the character part. |
7. A: Click on the channel panel, click on the blue channel, select menu: Image > Apply Image, parameters: Mixing: Multiply, Opacity: 50%, check Invert. B: Click on the green channel, select the menu: Image > Apply Image, parameters: Mixing: Multiply, Opacity: 20%, check Invert. C: Click on the red color channel, select the menu: Image > Apply Image, parameters: Mixing: Color Deepening, Opacity: 20%, Uncheck Invert. |
8. Copy another layer, press Ctrl + M to adjust the curve, and set the parameters as shown below. |
9. Create a new layer, change the layer blending mode to “Soft Light”, add purple and red gradients, erase the characters with the eraser tool, and then add text to complete the final effect. . |
<!–Collectio