I first met Zhang Ziyi through Zhang Yimou’s “My Father and Mother”. Her watery eyes attracted me deeply. Later, after watching “House of Flying Daggers”, I realized that she not only has a charming appearance but also a graceful dancing posture. Today, the author will lead you to create a Zhang Ziyi wallpaper.
Tools used: Photoshop CS3
Let’s take a look at the renderings first
01. Open Photoshop CS3, execute the [File_New] command to create a 1024×768 pixel file named [Dream Background] file as shown below. 
02. Select【 in the toolbox Gradient Tool], the gradient mode is [Linear Gradient], customize the gradient editor, set the parameters as shown in Figure 02, and then pull a gradient from bottom to top, the effect is as shown in Figure 03. 
03. Open a photo of Zhang Ziyi (select a larger photo), use the move tool to drag it to [Dream Background], name it [mmbig], and press [Ctrl+ T] key to adjust the layer size and position, as shown in the figure below. 
04. Then blend its layers Change the mode to [Overlay]. If there are obvious edges in the picture, you can add a layer mask to the [mmbig] layer by clicking the [Add Layer Mask] button in the layer palette and using Gradient fill from black to white, the effect is as shown in the picture below. (In this example, there is an obvious edge on the right side of the picture, so I made a gradient from right to left in the mask. You should make it according to the specific conditions of your own image)
05 Open another photo of Zhang Ziyi (the mission photo at this time can be smaller , but select the full-body image), pull out the character and drag it to [Dream Background], name it [mm], adjust the size and position of the layer, and the effect is as shown in the picture below. 
06． Next we’re going to use the brush to paint some grass. Click the [Create New Layer] button in the Layers Palette, create a new layer, name it [Grass 1], then set the foreground color to #576A00, the background color to #3E6001, and select ” “Grass” brush (this is the brush that comes with the software, everyone has it), press the [F5] key to bring up the [Brush] palette, and the parameter settings are as shown in the following figures. Then draw “green grass” in the picture. The effect is shown in Figure 10. 
07. Create a new layer, name it [Grass 2], and move it below the [mm] layer. Set the foreground color to #041000 and the background color to #0D3303. Still use the brush above, but the diameter of the brush should be larger so that taller grass can be drawn. Then change the opacity of [Grass 2] to 50%, the effect is shown in the picture below. 
08. Create a new layer and name it [Clouds] and move it on top of all layers, press the [D] key to restore the default color settings (the foreground color is black, the background color is white), execute the [Filter_Rendering_Clouds] command, and then Change the layer blending mode to [Soft Light], and the effect is as shown in the picture below. 
09. Create a new layer and name it [Texture], move it below [Grass 2], and draw some curves. You can play whatever you want at this time. It doesn’t have to be the same as mine. As long as the color of “Texture” is white and the blending mode of the layer is [Overlay]. That’s it, the effect is shown in the picture below. (In order to let everyone see clearly, I have hidden the [mm] layer)
10. Create a new layer, name it [Star], and move it above all layers. Select the [Brush Tool] in the toolbox, select the “Star” brush, and confirm The foreground color is white, and stars are drawn on the screen. The effect is as shown in the picture below. 
11. Select [ Horizontal text tool], enter the four words “Qing Wu Feiyang” to adjust its size and position, use the same method to enter your own signature, the effect is shown in the picture below. 
12. Press [Ctrl+Shift+ Alt+E 】key to stamp the layer to get ���Layer 1], copy [Layer 1], and get [Layer 1 copy]. For this layer, execute the [Filter_Blur_Gaussian Blur] command, set the blur radius to 2 pixels, and then change its blending mode to [Soft Light]. The purpose of this is to make the picture more layered. The effect is shown in Chapter 2. One page diagram.
I first met Zhang Ziyi through Zhang Yimou’s “My Father and Mother”. Her watery eyes attracted me deeply. Later, after watching “House of Flying Daggers”, I realized that she not only has a charming appearance but also a graceful dancing posture. Today, the author will lead you to create a Zhang Ziyi wallpaper.
Tools used: Photoshop CS3
Let’s take a look at the renderings first
01. Open Photoshop CS3, execute the [File_New] command to create a 1024×768 pixel file named [Dream Background] file as shown below.
02. Select【 in the toolbox Gradient Tool], the gradient mode is [Linear Gradient], customize the gradient editor, set the parameters as shown in Figure 02, and then pull a gradient from bottom to top, the effect is as shown in Figure 03.
03. Open a Zhang Zhang Ziyi’s photo (select a larger photo), use the move tool to drag it to [Dream Background], name it [mmbig], and press [Ctrl+T] to adjust the layer size and position, as follows As shown in the figure.
04. Then blend its layers Change the mode to [Overlay]. If there are obvious edges in the picture, you can add a layer mask to the [mmbig] layer by clicking the [Add Layer Mask] button in the layer palette and using Gradient fill from black to white, the effect is as shown in the picture below. (In this example, there is an obvious edge on the right side of the picture, so I made a gradient from right to left in the mask. You should make it according to the specific conditions of your own image)
05 Open another photo of Zhang Ziyi (the mission photo at this time can be smaller , but select the full-body image), pull out the character and drag it to [Dream Background], name it [mm], adjust the size and position of the layer, and the effect is as shown in the picture below.
06． Next we’re going to use the brush to paint some grass. Click the [Create New Layer] button in the Layers Palette, create a new layer, name it [Grass 1], then set the foreground color to #576A00, the background color to #3E6001, and select ” “Grass” brush (this is the brush that comes with the software, everyone has it), press the [F5] key to bring up the [Brush] palette, and the parameter settings are as shown in the following figures. Then draw “green grass” in the picture. The effect is shown in Figure 10.
07. Create a new Layer, name it [Grass 2] and move it below the [mm] layer. Set the foreground color to #041000 and the background color to #0D3303. Still use the brush above, but the diameter of the brush should be larger so that taller grass can be drawn. Then change the opacity of [Grass 2] to 50%, the effect is shown in the picture below.
08. Create a new layer and name it [Clouds] and move it on top of all layers, press the [D] key to restore the default color settings (the foreground color is black, the background color is white), execute the [Filter_Rendering_Clouds] command, and then Change the layer blending mode to [Soft Light], and the effect is as shown in the picture below.
09. Create a new layer and name it [Texture], move it below [Grass 2], and draw some curves. You can play whatever you want at this time. It doesn’t have to be the same as mine. As long as the color of “Texture” is white and the blending mode of the layer is [Overlay]. That’s it, the effect is shown in the picture below. (In order to let everyone see clearly, I have hidden the [mm] layer)
10. Create a new layer, name it [Star], and move it above all layers. Select the [Brush Tool] in the toolbox, select the “Star” brush, and confirm The foreground color is white, and stars are drawn on the screen. The effect is as shown in the picture below.
11. Select [ Horizontal Text Tool], enter the four words “Qingwu Feiyang” to adjustEnter its size and position using the same method to enter your signature. The effect is shown in the picture below.
12. Press [Ctrl+Shift+ Alt+E 】key to stamp the layer to get [Layer 1], copy [Layer 1] to get [Copy of Layer 1]. For this layer, execute the [Filter_Blur_Gaussian Blur] command, set the blur radius to 2 pixels, and then change its blending mode to [Soft Light]. The purpose of this is to make the picture more layered. The effect is shown in Chapter 2. One page diagram.
<!–Collectio
微信扫一扫打赏
支付宝扫一扫打赏
