1024programmer Photoshop Photoshop daytime photo to night scene photo effect – element effect

Photoshop daytime photo to night scene photo effect – element effect

Author:Lin Qizhe (Compiler) Source:eNet Silicon Valley Power

Let’s take a look at the final effect:

Step 1: New Create a file with the same size as the material file and name it [Country Night]. Open the material picture, press [Ctrl+C] to copy the layer, and press [Ctrl+V] to paste in [Country Night]. You will get New layer [Layer 1], the effect is as shown in the picture below.

Step 2: Select the [Pen Tool] in the toolbox, select path mode, and outline the building. The effect is as shown in the picture below. (Lin Qi Zhe’s words: Note that the path is closed and the bottom part of the image is selected, but it is not shown in the picture below)


Right-click on the image and select the [Create Selection] command in the pop-up menu, as shown in the figure below. Press [Ctrl+C] to copy the layer, and then press [Ctrl+V] to paste to get a new layer [Layer 2].

Step 3: Next we dim the sky. The method is to select [Layer 1], then press [Ctrl+U] to bring up the [Hue/Saturation] dialog box, and adjust [Brightness] to -77. The effect is as shown in the figure below.

Step 4: Looking at the picture above, we find that there are some sharp edges at the edge of the building. This shows that we did not do a good enough job in the second step of making the selection. At this time, we can select [Layer 2], and then use the [Eraser Tool] to erase the intersection between the building and the sky to get the effect below. (Lin Qi Zhe’s words: In this step, I use the method of adding a mask and then applying it with a black brush. In addition, you can try feathering the selection after making it, and then copy and paste it. You may be able to skip this step. . )

Step 5: Next we need to add some light. Imagine that there are lights in the house. On a quiet night, there must be a faint light shining through the cracks in the windows or walls. We create a new layer and name it [Light], use the [Polygonal Lasso Tool] to draw a selection as shown in the picture below, and fill it with golden yellow. The effect is shown in the picture below.

Step 6: Create a new layer, name it [Beam 1], and use the [Polygonal Lasso Tool] to make a selection as shown in the picture below.

Set the foreground color to dark yellow (a color close to orange-red, here it is used to simulate the light beam coming from the window, because there is no specific color value in the original text, so you have to adjust the color according to your feelings), select [Gradient Tool], the gradient method is a linear gradient from the foreground color to transparent, hold down the [Shift] key to make a gradient from right to left, as shown in the figure below. (Lin Qi Zhe said: When making gradients, you need to try again and again to achieve satisfactory results. In addition, when making this effect, in order to express the translucent effect of the light beam, I also reduced the opacity of the layer. Everyone is drawing. It can be used flexibly at any time.)


Follow the above method to add beams to each window (or door). (Each beam is best in a separate layer)

Step 7: Next, let’s adjust the color levels of [Layer 2]. Execute the [Image—Adjustment—Levels] command, and set the parameters as shown in the figure below.

The effect after adjusting the color levels is as follows.

Step 8: The edge of the beam is a bit stiff and not realistic enough. Let’s blur it next. Select a beam layer and execute the [Filter-Blur-Gaussian Blur] command with a blur radius of about 2 pixels. Perform Gaussian blur on each beam layer separately, and the effect is as shown in the figure below.

Step 9: Now that our “Country Night” is very beautiful, let’s continue to add other effects to it. Create a new layer, name it [Glow], select a flexible brush with the same color as the light beam, and then apply it on the [Glow] layer, as shown in the picture below.

Execute the [Filter-Blur-Gaussian Blur] command on the [Glow] layer, and the blur radius is about 40 pixels. Then change the layer opacity of this layer to 30%, the effect is as shown in the picture below. (Lin Qi Zhe’s words: You can adjust the opacity of the layer according to the specific situation. It does not have to be the same as in the tutorial.)

Step 10: The effect is now perfect, but there are still areas you need to modify. We all know that the light in the window will not be “perfect” like the picture above, but will generally have light and dark. We create a new layer on top of the [Light] layer and name it [Shadow]. Press the [Alt+Ctrl+G] keys to create a clipping mask, as shown in the figure below.


Select the [Brush Tool], set the foreground color to orange or brown, and paint on the doors and windows to create some “dark spots”. The effect is as shown in the picture below.

Summary: Up to the previous step, we have successfully converted an ordinary rural photo into “Country Night”, achieving our goal of “reversing black and white”. Below are some effects created on this basis. I hope it can give you some inspiration to create a more charming rural night scene.


Author:Lin Qizhe (Compiler) Source:eNet Silicon Valley Power

Let’s take a look at the final effect:

Step 1: New Create a file with the same size as the material file and name it [Country Night]. Open the material picture, press [Ctrl+C] to copy the layer, and press [Ctrl+V] to paste in [Country Night]. You will get New layer [Layer 1], the effect is as shown in the picture below.

Step 2: Select the [Pen Tool] in the toolbox, select path mode, and outline the building. The effect is as shown in the picture below. (Lin Qi Zhe’s words: Note that the path is closed and the bottom part of the image is selected, but it is not shown in the picture below)

Right-click on the image and select the [Create Selection] command in the pop-up menu, as shown in the figure below . Press [Ctrl+C] to copy the layer, and then press [Ctrl+V] to paste to get a new layer [Layer 2].

Step 3: Next we dim the sky. The method is to select [Layer 1], then press [Ctrl+U] to bring up the [Hue/Saturation] dialog box, and adjust [Brightness] to -77. The effect is as shown in the figure below.

Step 4: Looking at the picture above, we find that there are some sharp edges at the edge of the building. This shows that we did not do a good enough job in the second step of making the selection. At this time, we can select [Layer 2], and then use the [Eraser Tool] to erase the intersection between the building and the sky to get the effect below. (Lin Qi Zhe’s words: In this step, I use the method of adding a mask and then applying it with a black brush. In addition, you can try feathering the selection after making it, and then copy and paste it. You may be able to skip this step. . )

Step 5: Next we have to add some light. Imagine that there are lights in the house. On a quiet night, there must be a faint light shining through the cracks in the windows or walls. We create a new layer and name it [Light], use the [Polygonal Lasso Tool] to draw a selection as shown in the picture below, and fill it with golden yellow. The effect is shown in the picture below.

Step 6: Create a new layer, name it [Beam 1], and use the [Polygonal Lasso Tool] to make a selection as shown in the picture below.

Set the foreground color to dark yellow (a color close to orange-red, here it is used to simulate the light beam coming from the window, because there is no specific color value in the original text, so you have to adjust the color according to your feelings), select [Gradient Tool], the gradient method is a linear gradient from the foreground color to transparent, hold down the [Shift] key to make a gradient from right to left, as shown in the figure below. (Lin Qi Zhe said: When making gradients, you need to try again and again to achieve satisfactory results. In addition, I am making this effectIn order to express the translucent effect of the beam, the opacity of the layer was also reduced, which can be used flexibly when drawing. )

Add beams to each window (or door) as above. (Each beam is best in a separate layer)

Step 7: Next, let’s adjust the color levels of [Layer 2]. Execute the [Image—Adjustment—Levels] command, and set the parameters as shown in the figure below.

The effect after adjusting the color levels is as follows.

Step 8: The edge of the beam is a bit stiff and not realistic enough. Let’s blur it next. Select a beam layer and execute the [Filter-Blur-Gaussian Blur] command with a blur radius of about 2 pixels. Perform Gaussian blur on each beam layer separately, and the effect is as shown in the figure below.

Step 9: Now that our “Country Night” is very beautiful, let’s continue to add other effects to it. Create a new layer, name it [Glow], select a flexible brush with the same color as the light beam, and then apply it on the [Glow] layer, as shown in the picture below.

Execute the [Filter-Blur-Gaussian Blur] command on the [Glow] layer, and the blur radius is about 40 pixels. Then change the layer opacity of this layer to 30%, the effect is as shown in the picture below. (Lin Qi Zhe’s words: You can adjust the opacity of the layer according to the specific situation. It does not have to be the same as in the tutorial.)

Step 10: The effect is now perfect, but there are still areas you need to modify. We all know that the light in the window will not be “perfect” like the picture above, but will generally have light and dark. We create a new layer on top of the [Light] layer and name it [Shadow]. Press the [Alt+Ctrl+G] keys to create a clipping mask, as shown in the figure below.

Select the [Brush Tool], set the foreground color to orange or brown, and paint on the doors and windows to create some “dark spots”. The effect is as shown in the picture below.

Summary: Up to the previous step, we have successfully converted an ordinary rural photo into “Country Night”, achieving our goal of “reversing black and white”. Below are some effects created on this basis. I hope it can give you some inspiration to create a more charming rural night scene.


<!–Collectio

This article is from the internet and does not represent1024programmerPosition, please indicate the source when reprinting:https://www.1024programmer.com/photoshop-daytime-photo-to-night-scene-photo-effect-element-effect-2/

author: admin

Previous article
Next article

Leave a Reply

Your email address will not be published. Required fields are marked *

Contact Us

Contact us

181-3619-1160

Online consultation: QQ交谈

E-mail: [email protected]

Working hours: Monday to Friday, 9:00-17:30, holidays off

Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
首页
微信
电话
搜索