Photoshop photo synthesis tutorial: Doves flying in the dark night – photo synthesis

Author:Lin Qizhe (compiler) Source:eNet Silicon Valley Power

Use photoshop to combine several pictures together to make a creative picture of white doves flying in the night.
Let’s take a look at the final effect:

Material:

Step one: Open the material picture [Sky], as shown in the picture below. Create a new file with the same size as the material picture you just opened, and name it [Moonlight Flying]. Use the [Move Tool] to drag the material picture in and rename it [Night Sky].

Step 2: Next we will create an eerie atmosphere by adjusting the hue and saturation of the image. Select the layer [Night Sky] and press [Ctrl+U] to execute the [Hue/Saturation] command. The parameter settings and effects are as shown in the figure below. (Lin Qi Zhe’s words: Remember to check “Coloring”)

Step 3: Open the material picture [Moon] and use the [Elliptical Marquee Tool] to draw a selection around the moon as shown below. If the selection you drew is inappropriate, you can execute the [Select-Transform Selection] command to adjust the size and position of the selection.

After you select the moon, press the [Ctrl+J] keys to copy the layer to get [Layer 1]. Turn off the “eye” icon in front of the [Background] layer to hide the background layer for easier observation. Press the [Ctrl+D] keys to cancel the selection, and we find that there are still some black outlines on the edge of the moon. (Lin Qi’s words: If your selection is very suitable, you may not see this situation) Press and hold the [Ctrl] key, click the layer thumbnail of [Layer 1], load the selection, and execute [Select-Modify-Shrink] command to shrink the selected area by 2-3 pixels. Then press the [Ctrl+Shift+I] keys to flip the selection, and press the [Delete] key to delete the redundant part. After canceling the selection, observe the image again. If you are satisfied with the selected “Moon”, you can use the [Move Tool] to drag layer 1 into the [Moonlight Flying] file, and name the layer [Moon] . Press the [Ctrl+T] keys to enter the free transformation mode and adjust the size and position of the layer, as shown in the figure below. (Linqi’s words: This paragraph is a bit wordy, mainly to take care of beginners; in short, it is to dig out the “moon” and drag it into [Moonlight Flying]. Experts can operate according to their own habits)

Step 4: Looking carefully at the picture above, we find that the “moon” does not blend very well with its new background. Let’s make some modifications to it. Hold down the [Ctrl] key, click the layer thumbnail of [Moon], load the selection, execute the [Select-Modify-Border] command, and set the width to 3 pixels in the pop-up [Border Selection] dialog box. Then execute the [Filter-Blur-Gaussian Blur] command and set the blur radius to 1 pixel. Press the [Ctrl+D] keys to cancel the selection. (Lin Qi’s words: The author is using the “CS 3” version. If you don’t have the “Border” command in PS, you can try to use other commands to complete it. The purpose of this step is actually very simple, which is to remove the sharp edges of the “Moon” Blur it to make it blend better with the background, so if you perform appropriate “feathering” when drawing the “moon” selection in the third step, you may be able to skip this step)

Below. Let’s add some glow effects to the “moon”. In the layer palette, double-click the layer thumbnail of [Moon] to bring up the [Layer Style] dialog box. The parameter settings are as shown in Figure 2 below. (Lin Qi’s words: You should flexibly adjust these parameters according to your own images, and they don’t have to be exactly the same as the ones below; for example, in the “Inner Glow” special effect, I set the “Size” to 62 pixels, while it is 103 pixels in the original text. )

After the above operations, the effect is as shown in the figure below.

Step 5: Open the material picture [Eagle]. Although the image is a bit blurry, it can create a spooky atmosphere in this example. Use the [Magic Wand Tool] to select the background, press [Ctrl+Shift+I] to flip the selection, and then press [Ctrl+J] to copy the image in the selection.��, get [Layer 1]. Use the [Move Tool] to drag [Layer 1] into [Moonlight Flight] and name it [Eagle]. Results as shown below.

Step 6: Next we have two tasks to do. One is to reduce the size of the “eagle”; the other is to remove the white or purple light around the eagle. . Hold down the [Ctrl] key, click on the [Eagle] layer thumbnail, load the selection, and execute the [Select-Modify-Shrink] command to shrink the amount to 2 pixels. Press the [Ctrl+Shift+I] keys to flip the selection, then press the [Delete] key to delete the excess bright edges. Press the [Ctrl+D] keys to cancel the area selection. Press the [Ctrl+T] keys to enter the free transformation mode, adjust the size and position of the layer so that part of the eagle’s right wing just covers the moon, as shown in the picture below.

Step 7: Observe the picture above and find that the “Eagle” does not blend well with its new background, so we need to perform similar operations on it as we did for the “Moon” in Step 4. Hold down the [Ctrl] key, click the layer thumbnail of [Moon], load the selection, execute the [Select-Modify-Border] command, and set the width to 2 pixels in the pop-up [Border Selection] dialog box. Then execute the [Filter-Blur-Gaussian Blur] command with a blur radius of 0.7 pixels. Press the [Ctrl+D] keys to cancel the selection.

Next we will further modify the edges of the “eagle”, such as removing some excess highlights and colors from the eagle’s tail and wing tips. First, we need to click the [Lock Transparent Pixels] button in the Layers Palette, and then use the [Clone Stamp Tool] to modify the eagle’s tail and wings. If you think this step is difficult, you can skip this step, but in order to achieve better results, it is recommended that you perform this step.

When you have completed the above operations, you can unlock the layer [Eagle] by clicking the [Lock Transparent Pixels] button again.

Step 8: Use the [Lasso Tool] to roughly select the wings of the “Eagle”, as shown in the picture below.

Move the [Wings] layer below the [Eagle] layer, and change its layer blending mode to [Hard Light]. Select the [Wings Copy] layer and make it visible, and execute the [Motion Blur] command again. The parameter settings and effects are as shown in the figure below.

Click the [Add Vector Mask] button below the layer palette to add a layer mask to the [wing copy]. Select a flexible brush with a diameter of 300 pixels or larger and an opacity of 16%. Set the foreground color to black. Use this brush to paint on the right side of the wings to reshape the eagle’s head, body, and feet. display. (Lin Qi Zhi’s words: If you feel that you have painted too much or painted in the wrong place, just set the foreground color to white and paint out the wrong place) Then blend the layer of [Wing Copy] Change the mode to [Brighten], and the effect is as shown in the figure below.

Step 9: Repeat the above operation for the other wing of the eagle. In the [Eagle] layer, roughly select the other wing, press the [Ctrl+J] keys to copy the image, and name the new layer [Wing 2]. Press the [Ctrl+J] keys again to get [Wings 2 Copy]. Move the [Wings 2] layer below the [Eagle] layer, press [Ctrl+T] to enter the free transformation mode, drag the “center point” to the joint between the wings and the body, and then rotate the image, the effect is as shown below shown.

Select the [Wings 2 Copy] layer and rotate it in the opposite direction. Select the [Wings 2] layer, execute the [Motion Blur] command, set the angle to 80 degrees and the distance to 85 pixels. Then change its layer blending mode to [Hard Light].
Select [Wings 2 Copy], execute the [Motion Blur] command, the angle is 20 degrees, and the distance is 35 pixels. Then change its layer blending mode to [Lighten]. Add a layer mask to [Wings 2 Copy] and use a black soft brush to apply it to hide the unnecessary images. The effect is as shown in the picture below.

Now you have learned how to create a spooky effect by combining [Motion Blur] with [Layer Blending Mode]. You can do the same thing with the eagle’s tail. But do so in moderation, as the tail doesn’t move as fast as the wings.

Step 10: Further adjustments. Select the layer [Eagle] and execute [Image—Adjustment— Exposure] command,

Step 11: Use the [Elliptical Marquee Tool] to draw a small selection along the eagle’s eye, press the [Ctrl+J] keys to copy the layer, and name the new layer [Eye] 】. Change the blending mode of the [Eye] layer to [Screen]. This will make the eyes look “brighter”. Execute the [Image—Adjustment—Brightness/Contrast] command and adjust the values ​​appropriately to make the eyes look sharper. The effect is as shown in the figure below.

Step 12: Duplicate the [Eagle] layer to get [Eagle Copy], double-click the layer thumbnail of [Eagle Copy], bring up the layer style dialog box, select [Inner Glow], and set the parameters as shown below shown.

Click the [Create New Layer] button, create a new blank layer above the [Eagle Copy], and select this layer and the [Eagle Copy] layer at the same time (hold down the Shift key to select both layers at the same time) , press the [Ctrl+E] keys to merge the two layers, and name the merged layer [Glow]. Use the [Eraser] tool to erase unnecessary parts. The effect is as shown in the picture below. (You only need to keep the glowing effect on the eagle’s head, wings and tail)

Step 13: Create a new layer on the [Moon] layer and name it [Warm Color] . Choose a soft brush with a brush size of about 500 pixels and an opacity of 10%. Set the foreground color to orange-red, and then click on the moon area to add a little warm color to the picture. Then change the opacity of this layer to [Color]. You can adjust its color through the [Image – Adjustments – Hue/Saturation] command. Results as shown below.

Step 15: Add text. Use the [horizontal text tool] to enter the four words [flying on a moonlit night]. Add the [Outer Glow] effect to the text layer. Please refer to the figure below for parameter settings.

Copy the text layer to one layer, press [Ctrl+T] to enter the free transformation mode, expand the copied layer by 10-20%, create a new blank layer, and select this layer and the layer you just copied. Text layers, press [Ctrl+E] keys to merge them. Execute the [Filter-Blur-Motion Blur] command on the merged layer, set the angle to 0 degrees and the distance to 25 pixels. The final effect is shown below.

Author:Lin Qizhe (compiler) Source:eNet Silicon Valley Power

Use photoshop to combine several pictures together to make a creative picture of white doves flying in the night.
Let’s take a look at the final effect:

Material:

Step one: Open the material picture [Sky], as shown in the picture below. Create a new file with the same size as the material picture you just opened, and name it [Moonlight Flying]. Use the [Move Tool] to drag the material picture in and rename it [Night Sky].

Step 2: Next we will create an eerie atmosphere by adjusting the hue and saturation of the image. Select the layer [Night Sky] and press [Ctrl+U] to execute the [Hue/Saturation] command. The parameter settings and effects are as shown in the figure below. (Lin Qi Zhe’s words: Remember to check “Coloring”)

Step 3: Open the material picture [Moon] and use the [Elliptical Marquee Tool] to draw a selection around the moon as shown below. If the selection you drew is inappropriate, you can execute the [Select-Transform Selection] command to adjust the size and position of the selection.

After you select the moon, press the [Ctrl+J] keys to copy the layer and get [Layer 1]. Turn off the “eye” icon in front of the [Background] layer to hide the background layer for easier observation. Press the [Ctrl+D] keys to cancel the selection, and we find that there are still some black outlines on the edge of the moon. (Lin Qi’s words: If your selection is very suitable, you may not see this situation) Hold down the [Ctrl] key and click on the image of [Layer 1].�Thumbnail, load the selection, execute the [Select-Modify-Shrink] command to shrink the selection by 2-3 pixels. Then press the [Ctrl+Shift+I] keys to flip the selection, and press the [Delete] key to delete the redundant part. After canceling the selection, observe the image again. If you are satisfied with the selected “Moon”, you can use the [Move Tool] to drag layer 1 into the [Moonlight Flying] file, and name the layer [Moon] . Press the [Ctrl+T] keys to enter the free transformation mode and adjust the size and position of the layer, as shown in the figure below. (Linqi’s words: This paragraph is a bit wordy, mainly to take care of beginners; in short, it is to dig out the “moon” and drag it into [Moonlight Flying]. Experts can operate according to their own habits)

Step 4: Looking carefully at the picture above, we find that the “moon” does not blend very well with its new background. Let’s make some modifications to it. Hold down the [Ctrl] key, click the layer thumbnail of [Moon], load the selection, execute the [Select-Modify-Border] command, and set the width to 3 pixels in the pop-up [Border Selection] dialog box. Then execute the [Filter-Blur-Gaussian Blur] command and set the blur radius to 1 pixel. Press the [Ctrl+D] keys to cancel the selection. (Lin Qi’s words: The author is using the “CS 3” version. If you don’t have the “Border” command in PS, you can try to use other commands to complete it. The purpose of this step is actually very simple, which is to remove the sharp edges of the “Moon” Blur it to make it blend better with the background, so if you perform appropriate “feathering” when drawing the “moon” selection in the third step, you may be able to skip this step)

Below. Let’s add some glow effects to the “moon”. In the layer palette, double-click the layer thumbnail of [Moon] to bring up the [Layer Style] dialog box. The parameter settings are as shown in Figure 2 below. (Lin Qi’s words: You should flexibly adjust these parameters according to your own images, and they don’t have to be exactly the same as the ones below; for example, in the “Inner Glow” special effect, I set the “Size” to 62 pixels, while it is 103 pixels in the original text. )

After the above operations, the effect is as shown in the figure below.

Step 5: Open the material picture [Eagle]. Although the image is a bit blurry, it can create a spooky atmosphere in this example. Use the [Magic Wand Tool] to select the background, press the [Ctrl+Shift+I] keys to flip the selection, and then press the [Ctrl+J] keys to copy the image in the selection to obtain [Layer 1]. Use the [Move Tool] to drag [Layer 1] into [Moonlight Flight] and name it [Eagle]. Results as shown below.

Step 6: Next we have two tasks to do. One is to reduce the size of the “eagle”; the other is to remove the white or purple light around the eagle. . Hold down the [Ctrl] key, click on the [Eagle] layer thumbnail, load the selection, and execute the [Select-Modify-Shrink] command to shrink the amount to 2 pixels. Press the [Ctrl+Shift+I] keys to flip the selection, then press the [Delete] key to delete the excess bright edges. Press the [Ctrl+D] keys to cancel the area selection. Press the [Ctrl+T] keys to enter the free transformation mode, adjust the size and position of the layer so that part of the eagle’s right wing just covers the moon, as shown in the picture below.

Step 7: Observe the picture above and find that the “Eagle” does not blend well with its new background, so we need to perform similar operations on it as we did for the “Moon” in Step 4. Hold down the [Ctrl] key, click the layer thumbnail of [Moon], load the selection, execute the [Select-Modify-Border] command, and set the width to 2 pixels in the pop-up [Border Selection] dialog box. Then execute the [Filter-Blur-Gaussian Blur] command with a blur radius of 0.7 pixels. Press the [Ctrl+D] keys to cancel the selection.

Next we will further modify the edges of the “eagle”, such as removing some excess highlights and colors from the eagle’s tail and wing tips. First, we need to click the [Lock Transparent Pixels] button in the Layers Palette, and then use the [Clone Stamp Tool] to modify the eagle’s tail and wings. If you think this step is difficult, you can skip this step, but in order to achieve better results, it is recommended that you perform this step.

When you have completed the above operations, you can unlock the layer [Eagle] by clicking the [Lock Transparent Pixels] button again.

Step 8: Use the [Lasso Tool] to remove the “Eagle””The wings are roughly selected, as shown in the picture below.

Move the [Wings] layer below the layer [Eagle] and change its layer blending mode to [Strong Light]. Select the [Wing Copy] layer and make it visible, and execute the [Motion Blur] command again. The parameter settings and effects are as shown below.

Click [Add Vector Mask] below the Layers palette Click the Version button and add a layer mask to the wing copy. Select a soft brush with a diameter of 300 pixels or larger and an opacity of 16%. Set the foreground color to black and use this brush to paint the right side of the wing. Paint sideways so that the eagle’s head, body, and feet are visible again (Linhabiter’s Note: If you feel you painted too much or in the wrong place, just set the foreground color to white and change the wrong color. Just paint it out) and then change the layer blending mode of [Wing Copy] to [Lighten], the effect is as shown below.

Step 9: Repeat the above operation on the other wing of the eagle on the [Eagle] layer. , roughly select the other wing, press [Ctrl+J] to copy the image, and name the new layer [Wing 2]. Press [Ctrl+J] again to get [Wing 2 Copy]. Move the [Wings 2] layer below the layer [Eagle], press [Ctrl+T] to enter the free transformation mode, drag the “center point” to the joint between the wings and the body, and then rotate the image. The effect is as shown below

Select the [Wings 2 Copy] layer and rotate it in the opposite direction. Select the [Wings 2] layer and execute the [Motion Blur] command with an angle of 80 degrees and a distance of 85 pixels. Change its layer blending mode to [Hard Light].
Select [Wings 2 Copy] and execute the [Motion Blur] command with an angle of 20 degrees and a distance of 35 pixels. Then change its layer blending mode to [Lighten]. Add a layer mask to [Wings 2 Copy] and use a black soft brush to apply it to hide the unnecessary images. The effect is as shown in the picture below.

Now you have learned how to create a spooky effect by combining [Motion Blur] with [Layer Blending Mode]. You can do the same thing with the eagle’s tail. But do so in moderation, as the tail doesn’t move as fast as the wings.

Step 10: Further adjustments. Select the layer [Eagle] and execute the [Image—Adjustment—Exposure] command,

Step 11: Use the [Elliptical Marquee Tool] to draw a small selection along the eagle’s eye, and press [Ctrl+J 】key to copy the layer and name the new layer 【Eye】. Change the blending mode of the [Eye] layer to [Screen]. This will make the eyes look “brighter”. Execute the [Image—Adjustment—Brightness/Contrast] command and adjust the values ​​appropriately to make the eyes look sharper. The effect is as shown in the figure below.

Step 12: Duplicate the [Eagle] layer to get [Eagle Copy], double-click the layer thumbnail of [Eagle Copy], bring up the layer style dialog box, select [Inner Glow], and set the parameters as shown below shown.

Click the [Create New Layer] button, create a new blank layer above the [Eagle Copy], and select this layer and the [Eagle Copy] layer at the same time (hold down the Shift key to select both layers at the same time) , press the [Ctrl+E] keys to merge the two layers, and name the merged layer [Glow]. Use the [Eraser] tool to erase unnecessary parts. The effect is as shown in the picture below. (You only need to keep the glowing effect on the eagle’s head, wings and tail)

Step 13: Create a new layer on the [Moon] layer and name it [Warm Color] . Choose a soft brush with a brush size of about 500 pixels and an opacity of 10%. Set the foreground color to orange-red, and then click on the moon area to add a little warm color to the picture. Then change the opacity of this layer to [Color]. You can adjust its color through the [Image – Adjustments – Hue/Saturation] command. Results as shown below.

Step 15: Add text. Use the [horizontal text tool] to enter the four words [flying on a moonlit night]. Add the [Outer Glow] effect to the text layer. Please refer to the figure below for parameter settings.

Copy the text layer to one layer, press [Ctrl+T] to enter the free transformation mode, expand the copied layer by 10-20%, create a new blank layer, and select this image at the same time layer and the text layer you just copied, and press the [Ctrl+E] keys to merge them. Execute the [Filter-Blur-Motion Blur] command on the merged layer, set the angle to 0 degrees and the distance to 25 pixels. The final effect is shown below.

<!–Collectio