You can take a look at the effect first:
In this photoshop tutorial, I won’t spend too much time on the small details, so you must have some basics to understand what we are doing. Of course, if you have any questions, you can always leave them in the comment area.
Stock pictures.
Create a new photoshop document, use a light gray background, then cut out the girl picture and put it in the appropriate position.
, below we will change the girl’s tone using curves.
Curve parameters
RGB
Output: 119
Input: 157
Red
Output: 121
Input: 153
Green
Output: 165
Input: 133
blue
Output: 149
Input: 99
, the effect is already good, but here we make the color of the clothes more like the color of the hat, execute the Use Image Adjustment Replace Color command, and replace the light blue part with purple.
The effect is as follows.
Now that the effect is good, let’s add some better lighting effects to the face in order to achieve better results, so duplicate the girl layer and perform Image Adjustments Brightness Contrast (Brightness: 20, Contrast: 0).
On the layer mask (create one if you don’t have one already), use the Gradient Tool to keep the upper part brighter.
Use 41 Grunge Brushes and apply the same color as the girl on the left side of the image. Use the eyedropper tool to click on the girl to select a color, and paint wildly on the newly created layer. Finally you should see the following effect:
Now to make the picture look better, go back to the girl layer and use a grunge brush on the left side of the layer mask to add some black. It will look like the girl has been painted out. I also adjusted it a little. The edges and angles of the legs.
Next we will add light effects to the background of the photo. In order for us to make the background better, let’s start by creating a layer above the background layer and set three lines. The effect is as follows.
, Next we start to make a background, create a layer on top of the gray background, then use the radial gradient tool to spray a radial background around the girl, and then set the layer fill to 75%.
Next, in order to make the background more beautiful, we find a material and place it on the background light layer, then remove the color, adjust the mode to soft light mode, and set the fill to 46%.
The effect is as follows.
In order to make the area darker, we create a new layer, then use the radial gradient tool to fill it with black, and then adjust the layer fill to 80%.
Create a new layer, then use the Polygonal Lasso Tool, select the following area, and then use the white linear gradient tool to draw the following effect.
, adjust the layer fill to 20%, the effect is as follows.
Then we create a circle of size 30pixels, as a pattern, as shown in the image below.
Set a transparent background, then create a layer and fill it with the pattern. For a better effect, we add a mask layer and then use the gradient tool to create a background, as shown below.
, create a layer below the girl layer, and then use a brush with the following settings to draw a pattern of many white polka dots and black polka dots.
Then execute the motion blur filter, set the angle to 45, the distribution to 600, and then set the layer mode to strong light mode, the effect is as follows.
, then we create a new layer, then apply some dark yellow color pattern, set the layer mode to Overlay, and adjust the fill to 25%.
Now we open a material and place it on top of the background.
Remove the color and adjust the fill to 40%.
We add some white gradient light to the layer behind the girl.
, create another layer, and then select the single column selection box to create lines. We get a better effect. Rotate it 45 degrees, and then move it to the upper left part of the girl. The effect is as follows.
Then we open the tiger picture material.
Place the tiger image in the lower right corner of the girl and adjust the layer to Overlay.
Then using some smoke brushes, we draw some smoke in the lower right corner of the girl, and then adjust the layer fill to 50%, the effect is as follows.
, then we adjust part of the background to green, then set the layer mode to Soft Light and adjust the fill to 75%.
Could add some green.
, open another material.
Delete the color, and then adjust the layer mode to exclude mode. The effect is as follows.
, then create another layer and add some smoke effects.
Then enter the text [b]SOUL REBEL[/b], set the layer fill to 61%, and use the [b]Grunge Brushes[/b] brush to add some effects.
At this time, you can adjust it to be darker and adjust the fill to 69%, which will look like the following effect.
The layer mode is Linear Burn, and the effect is as follows.
, we set the color below, adjust the layer mode to linear light, and fill it to 75%. The effect is as follows.
Create a layer, use the Gradient Tool to make a gradient, then adjust the Mode to Soft Light and the Fill to 35%.
final effect. 
You can take a look at the effect first:
In this photoshop tutorial, I won’t spend too much time on the small details, so you must have some basics to understand what we are doing. Of course, if you have any questions, you can always leave them in the comment area.
Stock pictures.
Create a new photoshop document, use a light gray background, then cut out the girl picture and put it in the appropriate position.
, below we will change the girl’s tone using curves.
Curve parameters
RGB
Output: 119
Input: 157
Red
Output: 121
Input: 153
Green
Output: 165
Input: 133
blue
Output: 149
Input: 99
, the effect is already good, but here we make the color of the clothes more like the color of the hat, execute the Use Image Adjustment Replace Color command, and replace the light blue part with purple.
The effect is as follows.
, now the effect is good, in order to achieve better effect, we now add some better lighting effects to the face, so copy the girl layer, and then perform image adjustment brightness contrastdegree (brightness: 20, contrast: 0).
On the layer mask (create one if you don’t have one already), use the Gradient Tool to keep the upper part brighter.
Use 41 Grunge Brushes and apply the same color as the girl on the left side of the image. Use the eyedropper tool to click on the girl to select a color, and paint wildly on the newly created layer. Finally you should see the following effect:
Now to make the picture look better, go back to the girl layer and use a grunge brush on the left side of the layer mask to add some black. It will look like the girl has been painted out. I also adjusted it a little. The edges and angles of the legs.
Next we will add light effects to the background of the photo. In order for us to make the background better, let’s start by creating a layer above the background layer and set three lines. The effect is as follows.
, Next we start to make a background, create a layer on top of the gray background, then use the radial gradient tool to spray a radial background around the girl, and then set the layer fill to 75%.
Next, in order to make the background more beautiful, we find a material and place it on the background light layer, then remove the color, adjust the mode to soft light mode, and set the fill to 46%.
The effect is as follows.
In order to make the area darker, we create a new layer, then use the radial gradient tool to fill it with black, and then adjust the layer fill to 80%.
Create a new layer, then use the Polygonal Lasso Tool, select the following area, and then use the white linear gradient tool to draw the following effect.
, adjust the layer fill to 20%, the effect is as follows.
Then we create a circle of size 30pixels, as a pattern, as shown in the image below.
Set a transparent background, then create a layer and fill it with the pattern. For a better effect, we add a mask layer and then use the gradient tool to create a background, as shown below.
, create a layer below the girl layer, and then use a brush with the following settings to draw a pattern of many white polka dots and black polka dots.
Then execute the motion blur filter, set the angle to 45, the distribution to 600, and then set the layer mode to strong light mode, the effect is as follows.
, then we create a new layer, then apply some dark yellow color pattern, set the layer mode to Overlay, and adjust the fill to 25%.
Now we open a material and place it on top of the background.
Remove the color and adjust the fill to 40%.
We add some white gradient light to the layer behind the girl.
, create another layer, and then select the single column selection box to create lines. We get a better effect. Rotate it 45 degrees, and then move it to the upper left part of the girl. The effect is as follows.
Then we open the tiger picture material.
Place the tiger image in the lower right corner of the girl and adjust the layer to Overlay.
Then using some smoke brushes, we draw some smoke in the lower right corner of the girl, and then adjust the layer fill to 50%, the effect is as follows.
, then we adjust part of the background to green, then set the layer mode to Soft Light and adjust the fill to 75%.
Could add some green.
, open another material.
Delete the color, and then adjust the layer mode to exclude mode. The effect is as follows.
, then create another layer and add some smoke effects.
Then enter the text [b]SOUL REBEL[/b], set the layer fill to 61%, and use the [b]Grunge Brushes[/b] brush to add some effects.
At this time, you can adjust it to be darker and adjust the fill to 69%, which will look like the following effect.
The layer mode is Linear Burn, and the effect is as follows.
, we set the color below, adjust the layer mode to linear light, and fill it to 75%. The effect is as follows.
Create a layer, use the Gradient Tool to make a gradient, then adjust the Mode to Soft Light and the Fill to 35%.
final effect.
<!–Collectio
微信扫一扫打赏
支付宝扫一扫打赏
