1024programmer Photoshop Photoshop post-color grading processing: beautiful color photos – landscape color grading

Photoshop post-color grading processing: beautiful color photos – landscape color grading

We know that taking beautiful photos requires good cameras and lenses on the one hand, and superb shooting skills on the other. In addition, suitable weather and environment are also indispensable, and these are essential for ordinary families. For user photographers, it is more difficult to grasp, so the photos taken are of varying quality. At this time, we must use Photoshop, a powerful image processing software, for post-processing.

A good photo must not only have good content, but also have clear colors and layers. As shown in Figure 1, the content of the photo material is very good, but the layering of the entire photo is not clear enough and the color is not full enough. Next, we will use Photoshop to adjust the color of this photo.

Original image:

Photoshop post-processing: photos with beautiful colors

Rendering:

Photoshop post-processing: Beautifully colored photos webjx.com

The specific steps are as follows:

Step one: Start Photoshop CS3, select the “File → Open” (shortcut key Ctrl+O) command in the menu bar to open the photo material. Then expand the “Layer” panel, drag the “Background” layer to the “Create New Layer” button below, and create a new layer – the “Background Copy” layer.

Step 2: Increase the brightness of the photo. Select the “Image→Adjustment→Curves” command in the menu bar to open the “Curves” dialog box. Gently move the curve upward. We can see that as the curve moves, the photo becomes very clear as if it has been sprayed with air freshener. As shown in Figure 2, “confirm” after reaching the appropriate angle. Can.

Photoshop post-processing: photos with beautiful colors
Figure 2 Adjusting curves with Photoshop

Knowledge tip: You can adjust the tone and color of an image by changing the shape of the curve in the Curves dialog box. Moving the curve up or down will lighten or darken the image, depending on whether the dialog box is set to show levels or percentages. The steeper parts of the curve represent areas of higher contrast; the flatter parts of the curve represent areas of lower contrast.

Step 3: Adjust the color tone of the photo.

Select the “Image→Adjustment→Hue/Saturation” command in the menu bar to open the “Hue/Saturation” dialog box. First we make the green in the photo greener. Select “Green” in the “Edit” drop-down list box, then drag the “Hue”, “Saturation” and “Brightness” sliders appropriately while observing the color changes in the photo until the trees and lawn meet our requirements ,As shown in Figure 3.


Figure 3 Adjust Hue/Saturation

Then follow the above operation method to adjust the parts of the photo that are not full of color. Finally, adjust the hue and saturation of the “full image” so that the entire photo looks bright and colorful with clear layers. The final effect is shown in Figure 4. Isn’t it much more beautiful than the original material picture?


Figure 4 The final effect after modification

Summary: When it comes to using Photoshop to post-process photos, many people will wonder if it is a very troublesome thing, but it is not. The fundamental reason why we post-process photos is to make up for the flaws as much as possible. No matter what means or tools we use, as long as we achieve the goal. In this example, the brightness and hue/saturation adjustments were made to the photo. Two simple commands can easily achieve the effect. The more powerful Photoshop is, the easier it is to use

We know that taking beautiful photos requires good cameras and lenses on the one hand, and superb shooting skills on the other. In addition, suitable weather and environment are also indispensable, and these are essential for ordinary families. For user photographers, it is more difficult to grasp, so the photos taken vary from good to bad.At this time, we must use Photoshop, a powerful image processing software, for post-processing.

A good photo must not only have good content, but also have clear colors and layers. As shown in Figure 1, the content of the photo material is very good, but the layering of the entire photo is not clear enough and the color is not full enough. Next, we will use Photoshop to adjust the color of this photo.

Original image:

Photoshop post-processing: photos with beautiful colors

Rendering:

Photoshop post-processing: Beautifully colored photos webjx.com

The specific steps are as follows:

Step one: Start Photoshop CS3, select the “File → Open” (shortcut key Ctrl+O) command in the menu bar to open the photo material. Then expand the “Layer” panel, drag the “Background” layer to the “Create New Layer” button below, and create a new layer – the “Background Copy” layer.

Step 2: Increase the brightness of the photo. Select the “Image→Adjustment→Curves” command in the menu bar to open the “Curves” dialog box. Gently move the curve upward. We can see that as the curve moves, the photo becomes very clear as if it has been sprayed with air freshener. As shown in Figure 2, “confirm” after reaching the appropriate angle. Can.

Photoshop post-processing: photos with beautiful colors
Figure 2 Adjusting curves with Photoshop

Knowledge tip: You can adjust the tone and color of an image by changing the shape of the curve in the Curves dialog box. Moving the curve up or down will lighten or darken the image, depending on whether the dialog box is set to show levels or percentages. The steeper parts of the curve represent areas of higher contrast; the flatter parts of the curve represent areas of lower contrast.

Step 3: Adjust the color tone of the photo.

Select the “Image→Adjustment→Hue/Saturation” command in the menu bar to open the “Hue/Saturation” dialog box. First we make the green in the photo greener. Select “Green” in the “Edit” drop-down list box, then drag the “Hue”, “Saturation” and “Brightness” sliders appropriately while observing the color changes in the photo until the trees and lawn meet our requirements ,As shown in Figure 3.


Figure 3 Adjust Hue/Saturation

Then follow the above operation method to adjust the parts of the photo that are not full of color. Finally, adjust the hue and saturation of the “full image” so that the entire photo looks bright and colorful with clear layers. The final effect is shown in Figure 4. Isn’t it much more beautiful than the original material picture?


Figure 4 The final effect after modification

Summary: When it comes to using Photoshop to post-process photos, many people will wonder if it is a very troublesome thing, but it is not. The fundamental reason why we post-process photos is to make up for the flaws as much as possible. No matter what means or tools we use, as long as we achieve the goal. In this example, the brightness and hue/saturation adjustments were made to the photo. Two simple commands can easily achieve the effect. The more powerful Photoshop is, the easier it is to use

<!–Collectio

This article is from the internet and does not represent1024programmerPosition, please indicate the source when reprinting:https://www.1024programmer.com/photoshop-post-color-grading-processing-beautiful-color-photos-landscape-color-grading-2/

author: admin

Previous article
Next article

Leave a Reply

Your email address will not be published. Required fields are marked *

Contact Us

Contact us

181-3619-1160

Online consultation: QQ交谈

E-mail: [email protected]

Working hours: Monday to Friday, 9:00-17:30, holidays off

Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
首页
微信
电话
搜索