1024programmer Photoshop Photoshop Tutorial: Create Wooden Inlaid Text Effect – Ordinary Text Effect

Photoshop Tutorial: Create Wooden Inlaid Text Effect – Ordinary Text Effect

Author: Translator: luycas Source:

In this Photoshop tutorial I’ll show you how to create a wood inlay effect using wood textures, layer masks, and some creative selection techniques.

Step 1
First let’s create a new document, mine is 540 × 300 pixels, 72ppi. Size doesn’t matter. There are many good wood textures available online, the one I used is at Defcon – x.de. We will first create 3 layers and paste each wood texture separately. The color is not important, what is important is the tone of the wood, for which I chose light, medium and dark pieces. In the layers I put the lightest one at the bottom and the dark one at the top (as shown in the picture) because I wanted to use the lightest texture as the background of the image.

The textures on defcon-x are at a very high resolution and you may want to use the free transform feature to resize them until they fit your piece.

Step 2
Next, we need to choose a font. To achieve the effect I wanted, the font I used was Bifurk, ​​which can be downloaded for free at dafont.com.

Select the top wood texture layer, use the text tool, and enter the text you want to add.

Step 3
Now let’s add some layer masks to define the text texture layer. Press Command+click on the thumbnail of the text layer in the Layers panel to load the text selection.

Step 4
With the text layer selected, select the Light wood grain on the Layers panel as the working layer, then press the Add Layer Mask button to convert the selection to a layer mask.

Step 5
Then select the Dark wood grain, load the text selection, and add a layer mask on the Dark wood grain.

Step 6
At this point we have completed the creation of the text, but you can not delete it for safety reasons. Click the eye icon to the left of the text layer thumbnail to close the text layer.

Step 7
Make sure the top wood texture layer is selected as the active layer, then click on the layer mask on that layer to make sure that the element we are working on is applied to the layer mask and not the layer itself. When the layer mask is selected, the layer mask thumbnail will have small brackets surrounding it.

What we are going to do here is select an area on the layer mask to “blacken” it, allowing the layer underneath to show through. Using the Rectangular Marquee Tool, create a selection around one of the letters.

Step 8
Press the D key and make sure your foreground color is set to black, then we’ll press Option-Delete to fill our selection with black. Because the area in the layer mask is white to show the layer below, and the black will be masked, we just fill it with black to make the layer below the wood visible, and then press Command-D to deselect it.

Step 9
You can do some experiments next. Use the Rectangular Marquee Tool to create a long selection.

Step 10
I want this selection to appear at a 45-degree angle. You can go to the main menu and click Select > Transform. Hold down the Shift key to constrain the rotation. Once you’re satisfied with the position, press the Back key to confirm the transformation.

Move the selection to where you want the mask to be (same as the previous step).

Step 11
Obviously if I fill it with black, I’m blocking the other letters as well. To avoid this, we need to subtract some parts from the selection. By selecting the “Subtract from Selection” button of the Marquee Tool, I will create a selection around the selection in the areas I don’t want to be selected. This will remove any overlap between the selections.

Step 12
Now we just need to fill the selection with black and press Option-Delete to cover up another part of the dark wood grain image. Press Command-D to deselect.

Step 13
Continue this process so that the lines and highlights of each letter appear appropriate.

Step 14
The last thing I could do is add a 1 px white outline between the two wood textures of different depths for the letters. Use the stroke layer style settings as shown below. Note that I changed the color, size and transparency.

Step 15
My final text will look like this:

Step 16
You can make any shape with this method, I added a pentagram to my final image. I hope everyone can understand and use layer masks to create better effects.


Author: Translator: luycas Source:

In this Photoshop tutorial I’ll show you how to create a wood inlay effect using wood textures, layer masks, and some creative selection techniques.

Step 1
First let’s create a new document, mine is 540 × 300 pixels, 72ppi. Size doesn’t matter. There are many good wood textures available online, the one I used is at Defcon – x.de. We will first create 3 layers and paste each wood texture separately. The color is not important, what is important is the tone of the wood, for which I chose light, medium and dark pieces. In the layers I put the lightest one at the bottom and the dark one at the top (as shown in the picture) because I wanted to use the lightest texture as the background of the image.

The textures on defcon-x are at a very high resolution and you may want to use the free transform feature to resize them until they fit your piece.

Step 2
Next, we need to choose a font. To achieve the effect I wanted, the font I used was Bifurk, ​​which can be downloaded for free at dafont.com.

Select the top wood texture layer, use the text tool, and enter the text you want to add.

Step 3
Now let’s add some layer masks to define the text texture layer. Press Command+click on the thumbnail of the text layer in the Layers panel to load the text selection.

Step 4
With the text layer selected, select the Light wood grain on the Layers panel as the working layer, then press the Add Layer Mask button to convert the selection to a layer mask.

Step 5
Then select the Dark wood grain, load the text selection, and add a layer mask on the Dark wood grain.

Step 6
At this point we have completed the creation of the text, but you can not delete it for safety reasons. Click the eye icon to the left of the text layer thumbnail to close the text layer.

Step 7
Make sure the top wood texture layer is selected as the active layer, then click on the layer mask on that layer to make sure that the element we are working on is applied to the layer mask and not the layer itself. When the layer mask is selected, the layer mask thumbnail will have small brackets surrounding it.

What we are going to do here is select an area on the layer mask to “blacken” it, allowing the layer underneath to show through. Using the Rectangular Marquee Tool, create a selection around one of the letters.

Step 8
Press D��, make sure your foreground color is set to black, and then we’ll press Option-Delete to fill our selection with black. Because the area in the layer mask is white to show the layer below, and the black will be masked, we just fill it with black to make the layer below the wood visible, and then press Command-D to deselect it.

Step 9
You can do some experiments next. Use the Rectangular Marquee Tool to create a long selection.

Step 10
I want this selection to appear at a 45-degree angle. You can go to the main menu and click Select > Transform. Hold down the Shift key to constrain the rotation. Once you’re satisfied with the position, press the Back key to confirm the transformation.

Move the selection to where you want the mask to be (same as the previous step).

Step 11
Obviously if I fill it with black, I’m blocking the other letters as well. To avoid this, we need to subtract some parts from the selection. By selecting the “Subtract from Selection” button of the Marquee Tool, I will create a selection around the selection in the areas I don’t want to be selected. This will remove any overlap between the selections.

Step 12
Now we just need to fill the selection with black and press Option-Delete to cover up another part of the dark wood grain image. Press Command-D to deselect.

Step 13
Continue this process so that the lines and highlights of each letter appear appropriate.

Step 14
The last thing I could do is add a 1 px white outline between the two wood textures of different depths for the letters. Use the stroke layer style settings as shown below. Note that I changed the color, size and transparency.

Step 15
My final text will look like this:

Step 16
You can make any shape with this method, I added a pentagram to my final image. I hope everyone can understand and use layer masks to create better effects.


<!–Collectio

This article is from the internet and does not represent1024programmerPosition, please indicate the source when reprinting:https://www.1024programmer.com/photoshop-tutorial-create-wooden-inlaid-text-effect-ordinary-text-effect-4/

author: admin

Previous article
Next article

Leave a Reply

Your email address will not be published. Required fields are marked *

Contact Us

Contact us

181-3619-1160

Online consultation: QQ交谈

E-mail: [email protected]

Working hours: Monday to Friday, 9:00-17:30, holidays off

Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
首页
微信
电话
搜索