1024programmer Photoshop Teach you how to make a photo into a CD cover – Effect Tutorial

Teach you how to make a photo into a CD cover – Effect Tutorial

Author: Qiqi’er Author: Anonymous Source:

In this tutorial, we will create a CD one-sided effect. During production, we need to express the reflection effect of light. We can use the gradient tool to achieve this. The alignment function must be applied to the shape of the disc to achieve a concentric circle effect.

Final effect

1. Create a new document of 15 * 15 CM with a resolution of 96 pixels. The specific parameter settings are as follows. Create a new layer, select the Elliptical Marquee Tool, and set the parameters in the property bar as shown below.

2. Draw a perfect circle selection and fill it with 80% gray. The effect is as shown below.

3. After canceling the selection, select the Elliptical Marquee Tool, set the parameters as shown below in the property bar, then draw a perfect circular selection in the center of the screen, execute: Layer > Align layer with selection > Vertical Center command, then execute: Layer > Align layer to selection > Horizontally centered name, completely center align the layer and selection, and press Delete to delete some color blocks in the selection. The effect is as shown below.

4. Change the opacity of layer 1 appropriately, then set the layer style, select bevel/embossed, and set the parameters as shown below.

5. Create a new layer 2, select the Elliptical Marquee Tool, and set the values ​​as shown in the picture below. Hold down the Alt key and click in the center of the circle to create a selection. At the same time, select the two layers to link the layers. Execute: Layer > Align Layer to Selection > Vertical Center command, and then execute: Layer > Align Protrusion to Selection > Use the horizontal center command to align the layer and the selection completely in the center. Select layer 2 and fill it with 80% gray. The effect is as shown below.

6. Select the Elliptical Marquee Tool and set the values ​​as shown in the picture below. Hold down the Alt key and click in the center of the circle to create a selection. At the same time, select the two layers to link the layers. Execute: Layer > Align Layer to Selection > Vertical Center command, and then execute: Layer > Align Protrusion to Selection > Horizontal center command, align the layer and the selection completely in the center, press the Delete key to delete the color block in the selection, the effect is as shown below.

7. Select layer 2 and use the mode stick tool to select the gray part, and execute: Select > Save Selection, as shown below.

8. Select the gradient tool and try to use randomization when setting the gradient, as shown below.

9. Create a new layer 3, select the Elliptical Marquee Tool, and pull out the angle gradient shown in the picture below from the center of the screen to the edge.

10. Cancel the selection and adjust the layer opacity to: 50%. Copy layer 3 and rotate it 180 degrees to create an overlay effect on the two layers. Adjust the opacity of layer 3 back to: 100%. Select the layer. Merge 3 copies downward, and adjust the opacity of new layer 3 to: 50%, the effect is as shown below.

11. Select three layers and execute: Layer > Layer Group Name, and name the group “Disc”, as shown below.

12. Select layer 3 and the disc group at the same time and execute: Layer > Align layer with selection > Vertical center command, then execute: Layer > Align protrusion with selection > Horizontal center command, and align the layer with selection Align the selection completely to the center and fill it with 20% gray, as shown below.

13. Select the Elliptical Marquee Tool and set the properties as shown below. Align the layer and the selection completely in the center. Press Delete to delete some of the color blocks in the selection. Set the opacity to 50%. The effect is as shown below.

14. Create a new layer 5, use the rectangular marquee tool to select the entire screen, execute: Edit > Stroke, the value is 3, as shown below.

15. Create a new layer 6, load the layer 2 selection, and fill it with black.�Execute: Filter > Blur > Gaussian Blur, the value is 10, drag layer 6 below the disc group, the effect is as shown below.

16. Use the ellipse tool to create a perfect circular path, enter text along the path, and place the text layer at the top. The effect is as shown below.

17. Find a material picture, use the magic wand tool, set the tolerance to 20, click on the white part of the graphic to get a selection, and then press the letter “Q” to add a quick mask.

18. Select the brush tool, set the value as shown below, and then apply it on the screen. The effect is as shown below.

19. Click to edit in standard mode, exit the quick mask mode, and get the selection shown in the picture below.

20. After feathering the selection by 1 pixel, press Ctrl + Shift + I to invert the selection, and press Ctrl + C to copy. Go back to our disc file, load the layer 1 selection, press Ctrl + V to paste, the effect is as shown below.

21. Adjust the position of the pasted layer appropriately and drag it to the bottom of layer 4, as shown below.

22. Add headset material, the effect is as shown below.

23. Load the selection of layer 1, perform a 1-pixel stroke, and move the new layer to the bottom of the layer to complete the final effect.

Final effect:


Author: Qiqi’er Author: Anonymous Source:

In this tutorial, we will create a CD one-sided effect. During production, we need to express the reflection effect of light. We can use the gradient tool to achieve this. The alignment function must be applied to the shape of the disc to achieve a concentric circle effect.

Final effect

1. Create a new document of 15 * 15 CM with a resolution of 96 pixels. The specific parameter settings are as follows. Create a new layer, select the Elliptical Marquee Tool, and set the parameters in the property bar as shown below.

2. Draw a perfect circle selection and fill it with 80% gray. The effect is as shown below.

3. After canceling the selection, select the Elliptical Marquee Tool, set the parameters as shown below in the property bar, then draw a perfect circular selection in the center of the screen, execute: Layer > Align layer with selection > Vertical Center command, then execute: Layer > Align layer to selection > Horizontally centered name, completely center align the layer and selection, and press Delete to delete some color blocks in the selection. The effect is as shown below.

4. Change the opacity of layer 1 appropriately, then set the layer style, select bevel/embossed, and set the parameters as shown below.

5. Create a new layer 2, select the Elliptical Marquee Tool, and set the values ​​as shown in the picture below. Hold down the Alt key and click in the center of the circle to create a selection. At the same time, select the two layers to link the layers. Execute: Layer > Align Layer to Selection > Vertical Center command, and then execute: Layer > Align Protrusion to Selection > Use the horizontal center command to align the layer and the selection completely in the center. Select layer 2 and fill it with 80% gray. The effect is as shown below.

6�� Select the Elliptical Marquee Tool and set the values ​​as shown in the image below. Hold down the Alt key and click in the center of the circle to create a selection. At the same time, select the two layers to link the layers. Execute: Layer > Align Layer to Selection > Vertical Center command, and then execute: Layer > Align Protrusion to Selection > Horizontal center command, align the layer and the selection completely in the center, press the Delete key to delete the color block in the selection, the effect is as shown below.

7. Select layer 2 and use the mode stick tool to select the gray part, and execute: Select > Save Selection, as shown below.

8. Select the gradient tool and try to use randomization when setting the gradient, as shown below.

9. Create a new layer 3, select the Elliptical Marquee Tool, and pull out the angle gradient shown in the picture below from the center of the screen to the edge.

10. Cancel the selection and adjust the layer opacity to: 50%. Copy layer 3 and rotate it 180 degrees to create an overlay effect on the two layers. Adjust the opacity of layer 3 back to: 100%. Select the layer. Merge 3 copies downward, and adjust the opacity of new layer 3 to: 50%, the effect is as shown below.

11. Select three layers and execute: Layer > Layer Group Name, and name the group “Disc”, as shown below.

12. Select layer 3 and the disc group at the same time and execute: Layer > Align layer with selection > Vertical center command, then execute: Layer > Align protrusion with selection > Horizontal center command, and align the layer with selection Align the selection completely to the center and fill it with 20% gray, as shown below.

13. Select the Elliptical Marquee Tool and set the properties as shown below. Align the layer and the selection completely in the center. Press Delete to delete some of the color blocks in the selection. Set the opacity to 50%. The effect is as shown below.

14. Create a new layer 5, use the rectangular marquee tool to select the entire screen, execute: Edit > Stroke, the value is 3, as shown below.

15. Create a new layer 6, load the layer 2 selection, and fill it with black. Execute: Filter > Blur > Gaussian Blur, the value is 10, drag layer 6 below the disc group, the effect is as shown below.

16. Use the ellipse tool to create a perfect circular path, enter text along the path, and place the text layer at the top. The effect is as shown below.

17. Find a material picture, use the magic wand tool, set the tolerance to 20, click on the white part of the graphic to get a selection, and then press the letter “Q” to add a quick mask.

18. Select the brush tool, set the value as shown below, and then apply it on the screen. The effect is as shown below.

19. Click to edit in standard mode, exit the quick mask mode, and get the selection shown in the picture below.

20. After feathering the selection by 1 pixel, press Ctrl + Shift + I to invert the selection, and press Ctrl + C to copy. Go back to our disc file, load the layer 1 selection, press Ctrl + V to paste, the effect is as shown below.

21. Adjust the position of the pasted layer appropriately and drag it to the bottom of layer 4, as shown below.

22. Add headset material, the effect is as shown below.

23. Load the selection of layer 1, perform a 1-pixel stroke, and move the new layer to the bottom of the layer to complete the final effect.

Final effect:


<!–Collectio

This article is from the internet and does not represent1024programmerPosition, please indicate the source when reprinting:https://www.1024programmer.com/teach-you-how-to-make-a-photo-into-a-cd-cover-effect-tutorial-6/

author: admin

Previous article
Next article

Leave a Reply

Your email address will not be published. Required fields are marked *

Contact Us

Contact us

181-3619-1160

Online consultation: QQ交谈

E-mail: [email protected]

Working hours: Monday to Friday, 9:00-17:30, holidays off

Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
首页
微信
电话
搜索